Shopsmith Forums

Thanks for all the suggestions. I will check to see if anything is moving and fix that if it is the case.

With having a 500 model, the support legs are not an option. The brace under the table and a stool seem more my speed.

I will let you know what I find out. I am in the process of putting the ...

I was using the brad point SS bits, (1/2"), cutting blind holes in pine board. Preset all depths and location of fence in a scrap board. When I drilled my first hole in the good stock, the hole was short of the depth needed.
After resetting the depth from the test piece, I drilled the first one to ...

I have problems with the blade cutting at an angle from the back to the front of the bandsaw table. I have the blade at 90det to the table but and parrallel to the side of the table.

When I have the fence on the table and start a cut, the blade walks towards the non open side of the bandsaw. I have ...