No Cost Oscillating Spindle Sander Concept

algale · Post by **algale** » Sat Jan 07, 2012 7:15 pm

Thanks, Paul. I've learned a great deal from reading your posts so I'm glad if you got something out of this simple idea. Now I need to get some sanding drums!

JPG · Post by **JPG** » Sat Jan 07, 2012 7:21 pm

algale wrote:Thanks, Paul. I've learned a great deal from reading your posts so I'm glad if you got something out of this simple idea. Now I need to get some sanding drums!

A 'base' and hinge for that 'pedal' would be handy!;)

algale · Post by **algale** » Sat Jan 07, 2012 7:37 pm

[quote="JPG40504"]A 'base' and hinge for that 'pedal' would be handy!]
No question. Maybe that will be version 2.0.

skou · Post by **skou** » Sun Jan 08, 2012 4:52 pm

damagi wrote:An old bass drum pedal comes to mind as a nice option here as well. I really like this idea. There have been a number of times when I would have preferred to have both hands on the workpiece for drilling operations. Having a foot pedal for that would be great. hmm

OK, a couple of months ago, Woot.com had a footpedal toilet flusher. Out of the footpedal, comes a shielded cable. (Think bike brake cable.) On the other end, is a strong alligator clip, and a counter weight. When you step on the pedal, the alligator clip, which is attached to the chain in your bowl, pulls up the flapper on the toilet.

I got 3 of them, one is on my commode. Works just fine.

Here's MY idea. Loop the cable around from the back side of my ER headstock, and hook the clip on one of the quill advance handles, so it will pull up on the handle, advancing the quill. The ER return spring might not be strong enough to return it, but I'm pulling up, and have the counterweight. I could also go over the front of the headstock, but I like having the cable out of the way.

steve

JPG · Post by **JPG** » Sun Jan 08, 2012 8:37 pm

skou wrote:OK, a couple of months ago, Woot.com had a footpedal toilet flusher. Out of the footpedal, comes a shielded cable. (Think bike brake cable.) On the other end, is a strong alligator clip, and a counter weight. When you step on the pedal, the alligator clip, which is attached to the chain in your bowl, pulls up the flapper on the toilet.

I got 3 of them, one is on my commode. Works just fine.

Here's MY idea. Loop the cable around from the back side of my ER headstock, and hook the clip on one of the quill advance handles, so it will pull up on the handle, advancing the quill. The ER return spring might not be strong enough to return it, but I'm pulling up, and have the counterweight. I could also go over the front of the headstock, but I like having the cable out of the way.

steve

Why would the 10ER quill return spring 'not be strong enough'?;)