I hope those solar panels keep the shingles(if any) in the shade and there is air flow possible between them!backhertz wrote:I have renovated our hope with modern building techniques. Ventilating an attic is actually something that is something we don't do. We air sealed our place with closed-cell foam. As a result, out attic is only 6 degrees warmer in the summer than the temp of our upstairs floor. We installed a geothermal heat pump that is much smaller 48,000 BTU vs 80,000 BTU and we use solar power for electric to power it all. It's a 9,975 watt solar power system (~10KW) that results in our generating more power than we use & collect a credit from the electric company once a year.
Air sealing- especially the attic and walls will save you much in energy bills. But it's best done during construction. I opted for a huge company to do it, but you can easily do it yourself and do a combination of foam and fiberglass. Fiberglass 'breathes'. If you've ever seen fiberglass that looks black or dark- that is because there is an air leak & the fiberglass is acting as a filter, simply capturing the dirt & dust. So it's best to seal those leaks first & then use fiberglass or whatever you can find that is cheap.
You also need fresh air. For that we have an ERV-an energy recovery ventilator. But these are expensive methods. You can get Hilti Foam or Great Stuff in large containers and ensure every seam is sealed. Then fiberglass batts or blown in stuff sold by HD or L might help in keeping the cost to a minimum.
But for a hunting cabin, it would be a waste of money to do much considering the place wouldn't be used all that often. The answer to his question is to do the work himself or with his buddies and read as suggested by one of the other posters. "Alone in the Wilderness" is the story of a 50-some year old guy who built a cabin in Alaska and lived there for the last 30 years of his life. It's shown on PBS, but here is a link that shows how he built the place:
http://www.shoppbs.org/product/index.jsp?productId=2456246
He used simple tools and made whatever he needed- including his own boards using simple wood working skills. No power for a Shopsmith! Just his own two hands and a few simple tools. It was interesting to watch never-the-less.
small building or shed questions
Moderator: admin
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Who is 'Jacob?:Dbcone1381 wrote:So, Help me out. What is in it for Jacob? What is he going to get by doing what he did?
We do tend to branch out on 'related' tangents quite often. We are quite a ways from the trunk(thread subject). Unless Jacob responds with a question or two(?) more we are likely to stay way out there or move in another direction.
If he never replies I could understand since we assumed some wrong things early on in this thread..
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
judaspre1982
- Platinum Member
- Posts: 1237
- Joined: Tue Jul 08, 2008 10:10 pm
====================
Last edited by judaspre1982 on Sun Apr 30, 2017 3:30 pm, edited 1 time in total.
Perhaps they hunt vegetablesJPG40504 wrote: P.S. Wonder what Vegans 'hunt'?
http://www.youtube.com/watch?v=IYpYHg9v1ow
or confine their activities to the Mounted Animal Nature Trail
http://www.youtube.com/watch?v=5H-uLvhDGBw
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
bcone1381 wrote:So, Help me out. What is in it for Jacob? What is he going to get by doing what he did?
As I posted earlier, I don't believe Jacob is the least bit interested in what we say or think here on this forum. I suspect that Jacob builds (and maybe sells) web pages rather than wood projects..
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
If one does not click on his link, they really could not care less.dusty wrote:As I posted earlier, I don't believe Jacob is the least bit interested in what we say or think here on this forum. I suspect that Jacob builds (and maybe sells) web pages rather than wood projects..
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
One post does not make him a 'spammer', IMHO. A fisherman perhaps, but a meat byproduct, no! After all 'they' be vegans 'over there'!:Ddusty wrote:Yeah, I suppose you are correct but it still smells like spam to me. This guy just does not have any malicious intent.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
JPG40504 wrote:One post does not make him a 'spammer', IMHO. A fisherman perhaps, but a meat byproduct, no! After all 'they' be vegans 'over there'
If nothing else he got a decent discussion going.
On a side note several of the forums that I used to frequent are poorly moderated and have become filled with guys spouting their own hateful brand of politics and I have just quit going to them. I always bounce a number of people off of the batch of email list that I started up, especially on election years.
I do not want to even know what someone's politics are on a specialty forum. When that starts I just leave... (except on my lists, there I just do a few clicks and the problem is gone.
Sadly the pro spammers are getting smarter than they were a dozen years ago and I find that my spam fighting load gets heavier than it used to be.
I am also seeing a "LOT" more people trying to be some kind of guru and signing on a list just to direct traffic to their own blog. I allow a mention of a blog in their signature line but if I believe they have just signed on to use the list I toss them. Most of them post some very loose reference to the list subject then list their blog address.
After many years at it I can smell spam before the can is opened...
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill