Shopsmith sandpaper

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

michaelkilbourne
Bronze Member
Posts: 1
Joined: Fri Jul 06, 2012 2:47 pm

ShopSmith Sandpaper at Lowes

Post by michaelkilbourne »

Lowe's has currently replaced ShopSmith sandpaper at some test stores throughout the United States. After the test period is over, then the ShopSmith abrasives will move back into the stores. Around 10% of the stores are affected, the other 90% are continueing to sell the ShopSmith abrasives.

ShopSmith abrasive are top quality abrasives with the professional woodworker in mind. The ShopSmith sanding belts are made with a ceramic grain. Most other sanding belts are made with an aluminum oxide or zirconium oxide grain.
2bits
Gold Member
Posts: 102
Joined: Tue Mar 01, 2011 7:50 pm
Location: Tucson, Az.

Post by 2bits »

I found some of the Shopsmith brand sandpaper at the Lowes on Valencia in Tucson. They also had the "gator" brand of which I have not been very impressed with. I plan on giving the Shopsmith brand a try. They went to 320 grit at Lowes. Does anyone know if they (Shopsmith) offer finer grits?
emagnet
Gold Member
Posts: 66
Joined: Fri Jun 15, 2012 11:05 pm
Location: Newark, CA

Post by emagnet »

michaelkilbourne wrote: ShopSmith abrasive are top quality abrasives with the professional woodworker in mind. The ShopSmith sanding belts are made with a ceramic grain. Most other sanding belts are made with an aluminum oxide or zirconium oxide grain.
And yet, my order to Shopsmith for a ceramic grain belt has been on back order for more than 3 weeks. Maybe I should go to Lowe's.
emagnet
Gold Member
Posts: 66
Joined: Fri Jun 15, 2012 11:05 pm
Location: Newark, CA

Post by emagnet »

FWIW, intrigued by this thread, I called both of my 2 local Lowe's here in Fremont, CA. Neither of them carried the Shopsmith paper. I was, however, able two order 2 Shopsmith ceramic belts on Lowe's website. Time will tell if I have any better luck getting the belts from Lowe's than I have from Shopsmith.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

emagnet wrote:FWIW, intrigued by this thread, I called both of my 2 local Lowe's here in Fremont, CA. Neither of them carried the Shopsmith paper. I was, however, able two order 2 Shopsmith ceramic belts on Lowe's website. Time will tell if I have any better luck getting the belts from Lowe's than I have from Shopsmith.
Has anyone determined they are the same thing? Der color is different!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
skou
Platinum Member
Posts: 1944
Joined: Fri Feb 16, 2007 2:53 am
Location: Mesa (near Phoenix) Az

Post by skou »

Someone on the ER group, posted recently that Lowe's was just now carrying SS sandpaper, after not carrying it, in his local store.

Can't remenber who or where, but just remember his post. It was in the last couple of days, though.

Maybe, SS is coming back!!:D (3rd or 4th time?) Hope so!

steve
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

skou wrote:Someone on the ER group, posted recently that Lowe's was just now carrying SS sandpaper, after not carrying it, in his local store.

Can't remenber who or where, but just remember his post. It was in the last couple of days, though.

Maybe, SS is coming back!!:D (3rd or 4th time?) Hope so!

steve
Maybe some folks got spoiled with the SS paper and refuse to buy the Gator stuff!

My guess is that Lowe's needs a more predictable supply chain than SS can provide, or it just did not sell well.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
emagnet
Gold Member
Posts: 66
Joined: Fri Jun 15, 2012 11:05 pm
Location: Newark, CA

Post by emagnet »

Got e-mail confirmation from Lowe's today that the 80 grit has shipped. No word yet on the 120 grit. That's the grit I have on back order with Shopsmith. Coincidence?
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

I always chuckle when I read discussions such as this one. One might come to realize that these new abrasives are so far ahead of others that they have become difficult to keep in stock. Which makes me thankful I stocked up when I first decided they were better. I do appreciate the warnings and am watching my inventory carefully. As for big box stores and grocers inventory practices. I will use Lime Juice as an example. Our local grocer comment last week that they always have trouble keep it in stock during hot weather as it is popular for summer drinks. Now in my feeble one would think that buyers plan by prior history to increase inventories to deal with past shortages. Apparently the major grocery chains don't believe in such inventory control. The big box stores always amaze me at how empty their shelves are. Perhaps they aren't concerned about making a profit. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

fjimp wrote:I always chuckle when I read discussions such as this one. One might come to realize that these new abrasives are so far ahead of others that they have become difficult to keep in stock. Which makes me thankful I stocked up when I first decided they were better. I do appreciate the warnings and am watching my inventory carefully. As for big box stores and grocers inventory practices. I will use Lime Juice as an example. Our local grocer comment last week that they always have trouble keep it in stock during hot weather as it is popular for summer drinks. Now in my feeble one would think that buyers plan by prior history to increase inventories to deal with past shortages. Apparently the major grocery chains don't believe in such inventory control. The big box stores always amaze me at how empty their shelves are. Perhaps they aren't concerned about making a profit. Jim
Yep management by 'remote control'. Local management makes no stocking decisions.



Bigger is Better?:D



Watched Undercover Boss?;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply