Operator Safety

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Operator Safety

Post by paulmcohen »

I have worn a gold medic alert bracelet for the past 35 years that was "welded" on my arm by a paranoid mother who was afraid if I was ever unconscious someone would steal the bracelet before help arrived.

I have always been careful to keep it away from moving parts but I still worry. Last night while channel surfing I saw a show where two girl were working on cars and one of them worn some kind of bracelet cover. It looked like leather (the show was on low def so it was hard to see details), it was very tight and covered her dangling jewelry that she wore on her arm. They said it was important to never have hanging jewelry during the usually safety warnings but never said what she was wearing or where to find one. I have tried to Google it but I never get close. Has anyone here ever heard of this and know where to get it?
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
User avatar
holsgo
Platinum Member
Posts: 740
Joined: Sat Jul 04, 2009 9:48 pm
Location: Manassas, VA

Post by holsgo »

I know of the show, 2 girls garage I believe. I see what she's doing but me thinks that what you are seeing is electrical tape wrapped. At least I've seen the same with car guys, machinery guys...but then again, taking it off, if not welded to your skin, would be best.
paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Post by paulmcohen »

holsgo wrote:I know of the show, 2 girls garage I believe. I see what she's doing but me thinks that what you are seeing is electrical tape wrapped. At least I've seen the same with car guys, machinery guys...but then again, taking it off, if not welded to your skin, would be best.

Not welded to my skin but there is no way to remove it without cutting it off.

I like the idea of using electrical tape, I may try it.
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

paulmcohen wrote:Not welded to my skin but there is no way to remove it without cutting it off.

I like the idea of using electrical tape, I may try it.
Duct tape should work!;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Maybe find a leather worker who can fashion a coverup for ya.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

beeg wrote:Maybe find a leather worker who can fashion a coverup for ya.
Or a jeweler to add a clasp!;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Post by paulmcohen »

beeg wrote:Maybe find a leather worker who can fashion a coverup for ya.

I was looking to just buy something made for the purpose. With leather I was not sure how it would fasten.
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
User avatar
rpd
Platinum Member
Posts: 3045
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Post by rpd »

Would a sweat band, like tennis players wear, work?
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
holsgo
Platinum Member
Posts: 740
Joined: Sat Jul 04, 2009 9:48 pm
Location: Manassas, VA

Post by holsgo »

My thought would be that anything that protruded further than necessary would be a problem. I could never imagine reaching inside an engine bay with anything on me much less a thick band. Just wrap it with tape if possible, it clings, minimal protrusion and won't get caught on a spinning fan belt. Just an image to think of as I remember a disaster of sorts when in college working at a shop. Something spun then something bled...not me, but I had to try and clean the bay after.
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

holsgo wrote:My thought would be that anything that protruded further than necessary would be a problem. I could never imagine reaching inside an engine bay with anything on me much less a thick band. Just wrap it with tape if possible, it clings, minimal protrusion and won't get caught on a spinning fan belt. Just an image to think of as I remember a disaster of sorts when in college working at a shop. Something spun then something bled...not me, but I had to try and clean the bay after.
Some of us would not be caught reaching into an engine compartment under any circumstances. I discarded jewelry of all descriptions many years ago.

I was working with a guy who wore a ring (as did I at the time). He jumped down off a stack bed truck and his ring got caught on top of one of the stacks. It ripped his finger right off.

I also worked with a guy who stuck his hand inside a radio transmitter that was supposedly turned off. The RF energy, attracted by his ring, shot right out his elbow. Really nasty sight.

I don't wear jewelry.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Post Reply