Workbench redo

mountainbreeze · Post by **mountainbreeze** » Sun Jul 22, 2012 10:03 am

I made my workmench out of MDF and I finished it with Minwax Tung Oil Finish (because that's what I has on the shelf not being used). It put a nice finish on the MDF. Afterward, I applied 3 coats of JPW. It's a somewhat slick surface which I guess could be undesirable in some cases but I like it because glue won't stick to it.

beeg · Post by **beeg** » Sun Jul 22, 2012 11:17 am

mountainbreeze wrote:Afterward, I applied 3 coats of JPW.

Actually you applied one coat and removed two.

mountainbreeze · Post by **mountainbreeze** » Sun Jul 22, 2012 4:17 pm

beeg wrote:Actually you applied one coat and removed two.

Technically, I applied 3 coats and removed 2.

JPG · Post by **JPG** » Sun Jul 22, 2012 5:58 pm

mountainbreeze wrote:Technically, I applied 3 coats and removed 2.

Regardless, you are left with one 'coat'.

easterngray · Post by **easterngray** » Tue Jul 24, 2012 4:48 pm

Nice job on the bench! Looks great!

saminmn · Post by **saminmn** » Tue Jul 24, 2012 9:21 pm

Much thanks for all the supportive comments!! They added to my enjoyment of the project.