SS sighting in publication!

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
User avatar
pieceseeker
Gold Member
Posts: 370
Joined: Mon Jan 07, 2013 12:13 pm
Location: Lawrenceville, Georgia

SS sighting in publication!

Post by pieceseeker »

Hi guys! I went to Rockler today during my lunch break which is near my work. I picked up a couple magazines for some ideas about layout and organizing a small shop. In my case, a very small shop.

In the publication Home and Garden's Wood (a special interest publication) Big Ideas for Small Workshops, pg 47, there's a nice picture of a gentleman from New York state in his 12x12' shop next to his nice 510 and a SS belt sander power station. He turned a standalone shed into a nice workshop. Installed a garage door on it for lots of light and easy cleanup in warmer weather.

Just thought you might like to know. :)

Also, received my info pack from SS today, but I have already seen Sawdust Therapy on the internet. I was thinking I might get more material than that, but I guess I have pretty much seen it all on the SS site and youtube. While I work on converting a screened in porch into a micro shop, I'll wait and see if a Lowe's demo shows up in my area. I really would like to see one in person before purchasing.
User avatar
fixit
Gold Member
Posts: 439
Joined: Fri Jul 21, 2006 8:44 pm
Location: La Vernia, TX

Post by fixit »

You don't say where you live - someone might be close enough to let you see their Power Pro. However, your idea of waiting for a Lowe's demo is a good one. The discounts are significant AND you can get an additional discount with a Lowe's card AND if you are real lucky you can get one of the 18 months - no interest deals AND if you are a vet an extra 10% discount. Oops, I don't think you can get the Lowe's card discount and the vets discount at the same time.

However, you will not be dissatisfied with a Power Pro should you get one. It's a beauty!
----------------------------------------
Leonard
La Vernia, TX
Wood Goods - Custom Woodwork
EMAIL: woodgoods "at" lavernia "dot" net
PowerPro 520, PowerPro 500 (was my father's 500), SS jointer, SS Mark V mount planer, SS bandsaws (2), belt sander, scroll saw, SS jig saws (2), strip sander, Jointech system, 12" Delta Compound Miter Saw, a small collection of routers, a router table and a Delta Unisaw. All in a 24' x 24' shop.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

IIRC they have been in Atlanta already.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
pieceseeker
Gold Member
Posts: 370
Joined: Mon Jan 07, 2013 12:13 pm
Location: Lawrenceville, Georgia

Post by pieceseeker »

I am in the Atlanta area, but I am not a vet. I've heard about the discounts at the demo's. 10% would be significant!
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

pieceseeker wrote:I am in the Atlanta area, but I am not a vet. I've heard about the discounts at the demo's. 10% would be significant!

Murfreesboro Tn is the closest this month(very soon!!!!).

http://www.shopsmith.com/markvsite/event_schedule.htm
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
pieceseeker
Gold Member
Posts: 370
Joined: Mon Jan 07, 2013 12:13 pm
Location: Lawrenceville, Georgia

Post by pieceseeker »

JPG40504 wrote:Murfreesboro Tn is the closest this month(very soon!!!!).

http://www.shopsmith.com/markvsite/event_schedule.htm
Yea, I saw that, but don't think I can get away for the day. I've still got a lot of work to do anyway, I can wait for a closer one. :(
User avatar
letterk
Gold Member
Posts: 437
Joined: Wed Mar 14, 2012 4:28 pm
Location: Minneapolis\St. Paul, MN

Post by letterk »

Since you've seen the Sawdust Therapy infomercial once you make it to the demo the person doing the demonstration may look very familiar. The one I went to was hosted by Mike Young the guy from the infomercial. Very entertaining, but I don't think I'd have the guts to attempt the stall test he does. Although it shows that the Powerpro doesn't skip a beat.
User avatar
pieceseeker
Gold Member
Posts: 370
Joined: Mon Jan 07, 2013 12:13 pm
Location: Lawrenceville, Georgia

Post by pieceseeker »

letterk wrote:Since you've seen the Sawdust Therapy infomercial once you make it to the demo the person doing the demonstration may look very familiar. The one I went to was hosted by Mike Young the guy from the infomercial. Very entertaining, but I don't think I'd have the guts to attempt the stall test he does. Although it shows that the Powerpro doesn't skip a beat.
That will be very cool! Can't, but I'll have to wait. :mad:
" I cut it twice and it's still too short"


2006 Mark 520, 1983 Mark V model 500(soon to be a shorty)/Power Stand mounted Planer/Jointer/Belt Sander/Band Saw/Jigsaw on pwr stand/Scroll saw/Strip Sander/Power Station/Speed Reducer/Increaser/2 Nova chucks.... 12" DeWalt sliding compound mitre saw, 10" Delta tabletop saw, Bosch router and jig saw, Makita circular saw, Graco V-COMP HVLP, Festool CT-26 E Hepa
backhertz
Platinum Member
Posts: 674
Joined: Mon Jan 28, 2008 1:18 pm

Post by backhertz »

Back on Memorial Day, there was a Lowe's Demo by me in PA. I had no intention of buying anything, but rather seeing and showing my neighbor the new Mark 7.

I was presented an offer I couldn't refuse as Shopsmith had raised their prices on April 30 on the web site & also the Webinar. But at this demo, the old prices (pre-April 30 prices) were being honored. Holy cow, dude! During the demo, the Lowe's manager interrupted and announced any purchases made on a Lowe's card would be interest-free for 18 months. Twist my arm! I had just picked up a 1999 520 & a new bandsaw and figured it would look nicer as a Mark 7.

The 10% military discount was applied off everything including the shipping and no sales tax was charged. I used my Lowe's card and was given 18 months of no interest. I believe a person possessing a VA ID card is also extended the 10% military discount at Lowes or HD.
One Greenie, Two Mark 7s,Three 510s and much more…
User avatar
pieceseeker
Gold Member
Posts: 370
Joined: Mon Jan 07, 2013 12:13 pm
Location: Lawrenceville, Georgia

Post by pieceseeker »

backhertz wrote:Back on Memorial Day, there was a Lowe's Demo by me in PA. I had no intention of buying anything, but rather seeing and showing my neighbor the new Mark 7.

I was presented an offer I couldn't refuse as Shopsmith had raised their prices on April 30 on the web site & also the Webinar. But at this demo, the old prices (pre-April 30 prices) were being honored. Holy cow, dude! During the demo, the Lowe's manager interrupted and announced any purchases made on a Lowe's card would be interest-free for 18 months. Twist my arm! I had just picked up a 1999 520 & a new bandsaw and figured it would look nicer as a Mark 7.

The 10% military discount was applied off everything including the shipping and no sales tax was charged. I used my Lowe's card and was given 18 months of no interest. I believe a person possessing a VA ID card is also extended the 10% military discount at Lowes or HD.
I think the savings will be worth the wait, plenty to do in the meantime. If only Amazon sold them with their free shipping.....:D
" I cut it twice and it's still too short"


2006 Mark 520, 1983 Mark V model 500(soon to be a shorty)/Power Stand mounted Planer/Jointer/Belt Sander/Band Saw/Jigsaw on pwr stand/Scroll saw/Strip Sander/Power Station/Speed Reducer/Increaser/2 Nova chucks.... 12" DeWalt sliding compound mitre saw, 10" Delta tabletop saw, Bosch router and jig saw, Makita circular saw, Graco V-COMP HVLP, Festool CT-26 E Hepa
Post Reply