Flammable Chemical Storage

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

guvnuh4
Gold Member
Posts: 47
Joined: Wed Jan 02, 2008 12:20 pm
Location: Urbana, Iowa

Flammable Chemical Storage

Post by guvnuh4 »

I was curious what others are doing for storing flammable chemicals (finishes, high flash cleaning chemicals, etc...). I was looking at a fancy little wall cabinet that's rated for this purpose, but the 4 gallon unit cost around $300... After some of the other purchases that have been made and others that are in the very near future, I'm sure that SWMBO will not be terribly happy about that... But I know that the wood shop that I worked at in high school had a few large flammable cabinets in the finish department.

So does anyone else have a fancy storage method for their chemicals or do you just use a standard cabinet? Where would you place this on a cost vs. risk assessment?
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

Back when I was working for a living (instead of being on the dole) we had lots of flammable stuff. OSHA giged us big time for inadequate storage. Research found we could build a storage locker that would meet OSHA standards.

It was made from two layers of 3/4" Sheetrock. The big box (really a floor cabinet) was held together with 2x4s on both the inside and outside.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

I keep most of my flammable products in their original containers and in a closed cabinet. I think as long as they are not mixed or left open they are fairly safe that way.

For chemicals that are mixed, many of which react chemically I insure I use them completely after mixing or dispose of them. I would never consider keeping them in my shop.

My biggest concern is rags used with some the chemicals that are photo reactive or known to cause spontanteous combusion. Those rags are either disposed of by immediate burning or soaked with water and stored in an empty sealed gal paint can filled with water. I never allow chemical soaked rags to lie around in my shop, period.

If all else fails I will take the rags and seal them in a plastic garbage bag and store them outside in a safe area until the garabage pickup takes them.
I try to mimimize this as I don't want werid chemicals entering the land fills.

Also in our area we can take old chemicals to a collection center where they dispose of them for us.
Ed
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Ed in Tampa wrote:I keep most of my flammable products in their original containers ................
.....................Also in our area we can take old chemicals to a collection center where they dispose of them for us.
Ed
Me too, on both of these counts]http://www.ridgidforum.com/forum/images ... 2/idea.gif[/IMG]
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
Len
Gold Member
Posts: 161
Joined: Sun Dec 10, 2006 4:02 pm
Location: Sebastopol, Ca.

Post by Len »

And then I go to Costco and buy several of those smoke alarms, put batteries in them and place them above everything.
Anniversary Model 505 to 520 Up grade, with Band saw, Jointer, Strip & Belt Sander, and a catalog of wishes.
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

Again I hope this does not side track the thread but......

Someone once told me the biggest cause of house/garage fires was the cars parked in them. I have no idea if there is any truth to that accusation but I know in my case I tend to worthy more about the vehicles I park in my garage than I do the chemicals I store there.

If you think about it most chemicals stored in their original container has little potential for problem when compared to an automobile which is usually already hot when parked inside. And has it own methods for heat generation (the battery) and huge supply of flammable material (gasoline, oil, other fluids, hydrogen from the battery, fabrics, and rubber).

I guess we can make our selves crazy worrying about a can of turpentine and forget the real potential bombs around the house.
User avatar
Nick
Platinum Member
Posts: 808
Joined: Mon Aug 28, 2006 4:04 pm
Location: Dayton, Ohio
Contact:

Post by Nick »

The major danger with an enclosed cabinet containing volatiles is the accumulation of vapors. Open the cabinet and throw a nearby light switch, and suddenly you have a really good story to tell the folks crowded around your hospital bed. When I wrote my book on "Finishing," we took an ordinary metal cabinet that we picked up at a garage sale and vented it to the outside. It has two vents, one high and one low, connected to 4" dryer vents with 4" ribbed hose. The upper vent has a 4" muffin van that blows out 24 hours a day. It's been about 15 years and I haven't had to visit the hospital once, although I did replace the fan a while back.

With all good wishes,
guvnuh4
Gold Member
Posts: 47
Joined: Wed Jan 02, 2008 12:20 pm
Location: Urbana, Iowa

Post by guvnuh4 »

The venting issue was one that had been a sticking point for me. I know that I didn't want to have a vent opening straight out to my garage with more than a few ignition sources.

Would it be better to store the chemicals out in my "little" yard shed that isn't attached to the house or setup a vented cabinet in my attached garage? Nick, do have any fears that the fan motor could cause a spark?
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

guvnuh4 wrote:Nick, do have any fears that the fan motor could cause a spark?

My question exactly! I would think unless the muffin fan was an explosion proof fan it carries more danger than it prevents. Also if it doesn't have a fire quenching grill (approved by the forrestry service :) ) I would think it could turn into a really neat flame thrower.

As for outside storage in a garden shed you have to consider the lack of climate control. The chemicals could get too hot, too cold which could cause them to expand (read explode) or render them useless. For instance I had a full gallon jug of Titebond go bad I think from heat. I really don't know but it turned a really odd color orange and when I asked I was told it as no good.
dps1890
Silver Member
Posts: 10
Joined: Thu Mar 06, 2008 5:48 pm
Location: OKLAHOMA

Post by dps1890 »

Yes!!!!!!!!!!!!! Out In Another Place Not In Your Shop, Take It From Someone Who Knows.
Post Reply