hb2 wrote:I remember back 35 years ago when I went to the New York State Ranger School when I studied forest technology. One of things we had to bring to school was an axe. In one of the classes we had to sharpen it. We then received a grade not only on how we sharpened it but also on the geometry of the head and the grain of the handle. The head had to be convex, which I lost points as one side of my axe had a flat spot - there was no way to add metal to a poorly formed head. I also lost points as my axe handle had the grain perpendicular to the direction of swing - the handle breaks easier that way. Aside from that I had done a pretty good job of sharpening it and received a B+.
2 cross/perpendicular, 2 parallel to 'swing'.
Next???
Gonna try to find some handles to 'see' what is being made today.
My thoughts are that the wood is stronger tangent to the rings and weakest between the rings.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Time for a quiz, what type of wood is involved in this mallet that I made a few years ago?
[ATTACH]20852[/ATTACH]
[ATTACH]20853[/ATTACH]
[ATTACH]20854[/ATTACH]
Dan
Attachments
mallet1.jpg (59.53 KiB) Viewed 1150 times
mallet2.jpg (62.36 KiB) Viewed 1149 times
mallet3.jpg (78.87 KiB) Viewed 1149 times
Mark V 520,Mark V 510(2),Mark V 500(2) Dust Collector(2), Jointer(2), bandsaw(2), jigsaw, beltsander, biscuit joiner(2) Lathe Duplicator, RingMaster, Pro planer
