Doggy steps continued.
I used a V grove router bit to countersink the tapered bolts the taper angle was a little off but close enough. Something happened I don't understand some of the counter sync did not follow the predrilled holes but kind of made it's own path to the side making a less than craftsman look.
[ATTACH]21605[/ATTACH]
[ATTACH]21606[/ATTACH]
We are now in Klamath Falls, Oregon. It is 48 deg. Just went from rain to hail then sleet back to rain now sunshine. We are having fun now.
This is a view of the steps in use at the Klamath KOA. After looking at the picture a thought just occurred to me. If the stringers were a little thicker maybe 1 3/4 in we could use the steps and maybe I could make some husband points with SWMBO.
[ATTACH]21607[/ATTACH]
Doggy steps part 2
Moderator: admin
Doggy steps part 2
- Attachments
-
- IMG_0592 (800x600).jpg (366.82 KiB) Viewed 1475 times
-
- IMG_0594 (800x588).jpg (359.78 KiB) Viewed 1471 times
-
- IMG_0600 (800x600).jpg (540.33 KiB) Viewed 1470 times
Glenn
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Counter sink bits have a habit of doing that!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Pretty good thinking. That is one thing bad about a truck camper having to climb up in it. I had one when I was younger. Have a good and safe trip.
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless