The first picture is of a step stool that I made several years ago. Unfortunately time marches on. Some of the fun things that happen is its harder to step up and the sense of balance is not what it once was. SWMBO asked me to make a new step stool that was shorter than the one she was using. My first thought was to cut the legs on the old step stool. That was not the solution she needed a taller stool to reach the upper cupboards.
My thought was a two step stool with a post with a round knob on top fastened to the side to help with balance while stepping up. During the development phase I clamped a post on the old step stool to get some idea of the length of the balance pole. My wife suggested rather than placing the balance pole on the side put in the middle of the back so she could place both hands on the support post when stepping up. She also wanted hooks that could hold objects while stepping up on the upper step. The second picture is what I come up with. The third picture is the handle with horns rather than hooks on the side.
[ATTACH]24154[/ATTACH]
[ATTACH]24155[/ATTACH]
[ATTACH]24156[/ATTACH]
This weeks project
Moderator: admin
This weeks project
- Attachments
-
- S1.jpg (375.32 KiB) Viewed 3618 times
-
- S2.jpg (316.46 KiB) Viewed 3623 times
-
- S3.jpg (366.27 KiB) Viewed 3620 times
Glenn
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Clever use of a dovetail!!!!
May it be used for many years to come!
May it be used for many years to come!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Impossible dovetail
After I had committed to this dovetail I realized that this would be the perfect place for an impossible dovetail joint.http://www.youtube.com/watch?v=H69nvjtobxkJPG40504 wrote:Clever use of a dovetail!!!!
May it be used for many years to come!
Glenn
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
stumpbuster wrote:After I had committed to this dovetail I realized that this would be the perfect place for an impossible dovetail joint.http://www.youtube.com/watch?v=H69nvjtobxk
Hope you woulda made it this way.]http://www.youtube.com/watch?v=xg1J3tdfUFY[/URL]
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
newportcycle
- Gold Member
- Posts: 191
- Joined: Sat May 05, 2012 5:43 am
- Location: Pittsfield, Maine