delong94 wrote:Thanks. These are pretty neat. The gentleman in the film reminds me of my shop teacher from high school. We also had a great woodworking class when I was junior high. It's sad that most schools have now cut shop and woodworking out the curriculum. I was able to take basic metalwork, woodworking, and drafting in junior high. Everyone took those classes.
Ahh, but the academics that landed in school administration did not.
Somewhere along the way the primary purpose of the school systems shifted from life preparation to college preparation.
Quite narrow minded IMHO.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
I learn more from seeing than I ever will to reading a manual.
It's "funny", one of my "complaints" with the shopsmith is having to adjust the allen screws EVERY time on the fence. I guess that is the incorrect method. Now I'll have to figure out the correct method. LOL
In this video the guard is advertised as an accessory?
In this video the guard is advertised as an accessory?
Back then it was an extra cost accessory.
goldie optional accessories p4.jpg (693.72 KiB) Viewed 6549 times
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
What price do YOU get for a complete shopsmith! LOL
Paid less that you think!
goldie optional accessories p1.jpg (742.64 KiB) Viewed 6489 times
I got the 115v - 230v version.
Conjecture, but dual voltage not available today with emerson apparently not wanting to expose the the hidden splice. If it were dual voltage, that splice would be connected to an external wire.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
I wish I had an old Emerson Motor (meaning one that can not be repaired) to dig around in. That splice had to have been exposed at one time, meaning it could be dug out again. Now the windings might get destroyed in the meantime but then I would "know" that an Emerson can not be reversed.
I don't mean to be doubting anyone's word, especially Bill's), but that is what I believe.
"Making Sawdust Safely" Dusty
Sent from my Dell XPS using Firefox.
An earlier thread described the location of that splice. Wish I could find it!
I have an Emerson resurrected motor that I intend to pry around in one of these days. I will document that then.
IIRC it was close beneath the visible windings.
Non-access to that splice is what makes the Emerson motor non-reversible.
The subject motor is of uncertain origin, but very closely resembles an Emerson internally. I got it off e-bay. A basket case fer sure, but it now works(normal direction only).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
JPG wrote:An earlier thread described the location of that splice. Wish I could find it!
I have an Emerson resurrected motor that I intend to pry around in one of these days. I will document that then.
IIRC it was close beneath the visible windings.
Non-access to that splice is what makes the Emerson motor non-reversible.
The subject motor is of uncertain origin, but very closely resembles an Emerson internally. I got it off e-bay. A basket case fer sure, but it now works(normal direction only).
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
