Test run for a wall mounted coat rack and shelf. This was an easy build. No it is not done. Waiting for the glue to dry. Tomorrow I will finish it and attach the hooks. I think I will build more of these using some of my wormy chestnut.
16 inches long, 6 inches tall.
Built from a Pine Pallet wood. A single board that was 52 inches long. It had this giant knot in it, so this was what defined its overall length. Mostly no proportions with me. I just grab a board and start building something with it!
Earlier in the day, I made new queen sized bed slats. Not excitin enough to post in here, so I wont post a pic of them. But these same slats, also came from a pallet... I dismantled the pallet, denailed the wood, then made dern certain, that it was metal free. Then planned the cupping out of it, ripped to its final width 2.5 inches and then glue lammed the 2 halves together. An instant, 1.5 inch thick, 2.5 inch wide, 60.75 inches long, bed slat!
Oh how I just love, all of my tools!
Wall mounted Coat Rack with Shelf
Moderator: admin
Wall mounted Coat Rack with Shelf
- Attachments
-
- coatrack.jpg (62.01 KiB) Viewed 7178 times
-
- coatrack2.jpg (64.35 KiB) Viewed 7178 times
I am a true blue Xylophiliac, who also is a Nemophiliac 
Re: Wall mounted Coat Rack with Shelf
Nice design, I like the shelf on top.
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
-
rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: Wall mounted Coat Rack with Shelf
Cool idea. Did you make it for yourself, or do you sell them?
Nice design ....
Nice design ....
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Wall mounted Coat Rack with Shelf
Ever heard of 'shaker pegs"?
That rack cries out for them rather than metal hooks.
That rack cries out for them rather than metal hooks.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Wall mounted Coat Rack with Shelf
Hmm, now that is a great idea. Wished I thought of it. Must go with Shaker Pegs on next build. Tough to do it with this one, since it is already glued up. Yes, resale.
I am a true blue Xylophiliac, who also is a Nemophiliac
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Wall mounted Coat Rack with Shelf
ExtraMile wrote:Hmm, now that is a great idea. Wished I thought of it. Must go with Shaker Pegs on next build. Tough to do it with this one, since it is already glued up. Yes, resale.
One could drill the holes from the back.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Wall mounted Coat Rack with Shelf
Could you use a Forstner bit with an extension to reach past the shelf?
Bill V
Bill V
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Wall mounted Coat Rack with Shelf
I'm guessing the hooks are already screwed on.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Wall mounted Coat Rack with Shelf
Not yet. Like many of my other projects, they lie in wait for me to finish them!
I keep getting more and more ideas and begin them... lol!
I keep getting more and more ideas and begin them... lol!
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Wall mounted Coat Rack with Shelf
I was a busy bee in my shop today. I did get many of my pending items, finished. But not this one.
I did however, drill the holes for the pegs.
I did however, drill the holes for the pegs.
I am a true blue Xylophiliac, who also is a Nemophiliac