Here is a sneak peak
Mug concept
Moderator: admin
Mug concept
Yes, this is just in the preliminary stages, with many more, stages ahead.
Here is a sneak peak
Here is a sneak peak
- Attachments
-
- Mug.jpg (67.6 KiB) Viewed 8506 times
-
- Mug1.jpg (58.08 KiB) Viewed 8506 times
I am a true blue Xylophiliac, who also is a Nemophiliac 
Re: Mug concept
Do you mean "mug" like in "Coffee mug"
Bill V
Bill V
Re: Mug concept
Seeing this brought a smile to my face as I just experimented with birdsmouth joints this weekend in an attempt to make a curved panel....
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
BuckeyeDennis
- Platinum Member
- Posts: 3814
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Mug concept
Still working on the canoe deck? ExtraMile's photo immediately brought to mind the pinch dogs that came with my 10ER, in a goody box full of patternmaker's tools. It took me a while to figure out what they were (I almost tossed themalgale wrote:Seeing this brought a smile to my face as I just experimented with birdsmouth joints this weekend in an attempt to make a curved panel....
), but they are just plain wonderful for edge-gluing curved panels. ExtraMile doesn't really need them, though, because he has a full cylinder that he can band-clamp.Re: Mug concept
How'd you guess? Yes, pinch dogs would be handy....BuckeyeDennis wrote:Still working on the canoe deck? ExtraMile's photo immediately brought to mind the pinch dogs that came with my 10ER, in a goody box full of patternmaker's tools. It took me a while to figure out what they were (I almost tossed themalgale wrote:Seeing this brought a smile to my face as I just experimented with birdsmouth joints this weekend in an attempt to make a curved panel....
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Mug concept
Yes, as in drinking any beverage.
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Mug concept
FYI: In case you care... there will be a lull in my postings on here.
Those mugs, will be my main squeeze, until I can make a dozen or more.
As I have a chance in going to, two major vendor exhibits, in July and August and I need to use every waking hour building these! Along with, getting other stock, built up!
For example: photo one shows a portion of the 32 staves that I made today.
These same staves, where made with rough cut oak. The 3/4" board needed to be planed down to 3/8 inch, and so on. It is a rough way to build, but when I do not have the extra cash to go and purchase wood from one of the retailers, then I must mill all of my wood, for my builds!
Those mugs, will be my main squeeze, until I can make a dozen or more.
As I have a chance in going to, two major vendor exhibits, in July and August and I need to use every waking hour building these! Along with, getting other stock, built up!
For example: photo one shows a portion of the 32 staves that I made today.
These same staves, where made with rough cut oak. The 3/4" board needed to be planed down to 3/8 inch, and so on. It is a rough way to build, but when I do not have the extra cash to go and purchase wood from one of the retailers, then I must mill all of my wood, for my builds!
- Attachments
-
- Mug2.jpg (21.16 KiB) Viewed 8378 times
-
- Mug5.jpg (14.2 KiB) Viewed 8378 times
I am a true blue Xylophiliac, who also is a Nemophiliac
-
ddub
Re: Mug concept
If I made one of these, it would leak hot coffee on someone and I'd get sued! LOL
Shows are a lot of work. People who don't vend have no idea how much prep goes into prepping for them.
Good luck and keep that nose to the grindstone.
Maybe post the shows that you attend. I have a bro not to far from you. It is a possibility that someday I could be in the neighborhood.
Shows are a lot of work. People who don't vend have no idea how much prep goes into prepping for them.
Good luck and keep that nose to the grindstone.
Maybe post the shows that you attend. I have a bro not to far from you. It is a possibility that someday I could be in the neighborhood.
Re: Mug concept
Big Butler Fair
&
Butler Farm Show
And these mugs will be tightly sealed with Epoxy!
&
Butler Farm Show
And these mugs will be tightly sealed with Epoxy!
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Mug concept
Will be interesting to see the finished product, how it will hold liquids.
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless