I had to stop progress on this build, due to not having the proper screw lengths for the uprights to be attached.
Tomorrow, I will seek them out. I will try to get, screws and some sort of insert to, well <insert> into the wood, so that one can dismantle the upright and nest the two trays together, for storage, when not in use!
Fruit rack
Moderator: admin
Fruit rack
- Attachments
-
- Tray.jpg (51.38 KiB) Viewed 9556 times
I am a true blue Xylophiliac, who also is a Nemophiliac 
Re: Fruit rack
Today, I located T-Nuts for the supports. But once again, the cost of them, were IMHO cost prohibitive, so I intend to use dowels and pegs to attach the two verticals of this project.
Here is a finished Fruit Tray, now mind ya... this latest photo is not my finished fruit tray!
Here is a finished Fruit Tray, now mind ya... this latest photo is not my finished fruit tray!
- Attachments
-
- Tray2.jpg (31.6 KiB) Viewed 9503 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Fruit rack
More Widgets!
- Attachments
-
- widgets.jpg (64.3 KiB) Viewed 9441 times
I am a true blue Xylophiliac, who also is a Nemophiliac
-
rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: Fruit rack
Put a hinge on one side of the stacked ones in the back and a hasp and you have a cat carrier.....ExtraMile wrote:More Widgets!
I like them!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Fruit rack
Rather than T-nuts, try these: http://www.mcfeelys.com/1-4-20-steel-th ... l?___SID=U
threaded inserts. This link is for 1/4 20, but other sizes abound!
Nice project by the way!
Chris
threaded inserts. This link is for 1/4 20, but other sizes abound!
Nice project by the way!
Chris
Re: Fruit rack
Update, there is a lot more to attaching the uprights. If you build these, be sure to only attach each upright, with two opposing screws in each basket, (in the beginning). As each basket has a tendency to rack. Also, I would highly suggest to get your level out and apply at least 3 screws per basket per side.
All finished with BLO!
Eastern Yellow Pine and 1/2" birch plywood for the slats. I also used 1 inch stainless pan head screws. These trays will be in a highly humid room or any home. We wouldn't want the hardware to begin rusting.
I will, check back on this thread for future suggestions, at a later date. I choose SS Screws. for this lot of the trays.
Next week, I will be vending at a local farm show event.
So no shop time for me... what is a guy to do?
Many thanks, for the commentary!!!
All finished with BLO!
Eastern Yellow Pine and 1/2" birch plywood for the slats. I also used 1 inch stainless pan head screws. These trays will be in a highly humid room or any home. We wouldn't want the hardware to begin rusting.
I will, check back on this thread for future suggestions, at a later date. I choose SS Screws. for this lot of the trays.
Next week, I will be vending at a local farm show event.
So no shop time for me... what is a guy to do?
Many thanks, for the commentary!!!
- Attachments
-
- tray3.JPG (106.76 KiB) Viewed 9365 times
-
- tray4.jpeg (124.32 KiB) Viewed 9365 times
-
- tray5.jpeg (107.58 KiB) Viewed 9365 times
I am a true blue Xylophiliac, who also is a Nemophiliac
-
ddub
Re: Fruit rack
I was at a farmers market today. They would have been a good thing for some of the vendors. Might want to stop in at some and see if you can market them there. Good looking vegetables sell better and double stacked takes up less space!
Re: Fruit rack
Produce trays, times six!
- Attachments
-
- tray6.jpeg (306.92 KiB) Viewed 9307 times
-
- tray7.jpeg (303.58 KiB) Viewed 9307 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Fruit rack
I added something to these 
- Attachments
-
- tray9-w-nana.jpg (66.44 KiB) Viewed 9104 times
-
- tray8-w-nana.jpg (45.19 KiB) Viewed 9104 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Fruit rack
That's a really good idea!
I might consider a scaled-down version for the kitchen.
I've heard that separating fruit types is a good idea. Mixed fruits in close proximity can issue vapors that lead to faster spoiling.
Chris
I might consider a scaled-down version for the kitchen.
I've heard that separating fruit types is a good idea. Mixed fruits in close proximity can issue vapors that lead to faster spoiling.
Chris