http://newportnews.americanlisted.com/2 ... 80585.html
I know the ad is expired but would this be considered a "good deal"? Still searching. One popped up recently but they were asking 2000. Out of my price range.
http://norfolk.craigslist.org/tls/5346089852.html
Beginner - Hobby
Moderator: admin
-
stephen_a._draper
- Gold Member
- Posts: 258
- Joined: Tue Apr 20, 2010 9:08 pm
- Location: Bellevue, Nebraska
- Contact:
Re: Beginner - Hobby
Way overpriced. $800 would be reasonable.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Beginner - Hobby
Includes jointer, scroll saw, band saw, belt sander, DC and a bunch of smaller stuff. Twice that would be more reasonable. Yes it all needs TLC.
However a few concerns. The main table appears to be the early 510 version. The rails have either been mounted reversed or modified. The other tables have a mix of early/later 510 rails and they have different rails on the opposite ends of the same table(s).
However a few concerns. The main table appears to be the early 510 version. The rails have either been mounted reversed or modified. The other tables have a mix of early/later 510 rails and they have different rails on the opposite ends of the same table(s).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Beginner - Hobby
http://norfolk.craigslist.org/tls/5349032060.html
Just popped up. Said he has enough accessories to fill up a truck. Comes with vacuum also. He was using it mainly as a table saw. Looks like it's a 510 based on the hand wheel and larger table.
Opinions?
Just popped up. Said he has enough accessories to fill up a truck. Comes with vacuum also. He was using it mainly as a table saw. Looks like it's a 510 based on the hand wheel and larger table.
Opinions?
Re: Beginner - Hobby
I'd go have a look. Hard to tell much from the pic other than it is a 510.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Beginner - Hobby
JPG, did you mean half that would be more reasonable?JPG wrote:Includes jointer, scroll saw, band saw, belt sander, DC and a bunch of smaller stuff. Twice that would be more reasonable. Yes it all needs TLC.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Beginner - Hobby
Heading up now to check it out.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Beginner - Hobby
ERLover wrote:JPG, did you mean half that would be more reasonable?JPG wrote:Includes jointer, scroll saw, band saw, belt sander, DC and a bunch of smaller stuff. Twice that would be more reasonable. Yes it all needs TLC.
I meant $1600 would be more reasonable than $800.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Beginner - Hobby
JPG, I am sorry,a bit confused, why offer more? Or were talking fair market value for all that used?
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Beginner - Hobby
ERLover wrote:JPG, I am sorry,a bit confused, why offer more? Or were talking fair market value for all that used?
$1600 is less than the asking price($2000) and twice the suggested counter offer.
http://www.shopsmith.com/ss_forum/viewt ... 22#p198722
http://www.shopsmith.com/ss_forum/viewt ... 23#p198723
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange