Page 2 of 2
Posted: Mon Dec 10, 2012 2:57 am
by skou
algale wrote:Pool store "shock" is calcium hypochlorite, which turns to chlorine, i.e. bleach, in water. You can use a small amount and get enough concentration to work. Household bleach is generally too little concentration to be effective.
Household bleach is sodium hypochlorate, and when exposed to the elements enough, it will become sodium cloride. (Or, salt.)
Bleach is 5.2 or 6.0 concentrate. The lower concentration is in the gallon bottles, the higher mix is in 3 quart bottles. But, they're the same price.
steve
Posted: Mon Dec 10, 2012 11:14 am
by randythewoodchuck
Thank you all for the input. I will give it a try in the next day or two and let you know the outcome.
Posted: Mon Dec 10, 2012 11:43 am
by terrydowning
Hang on a second
First ask your self the following question.
Is this going to be worth the hassle??
It may be simpler and more cost effective to either:
paint or veneer over the item or
construct a new item with new plywood (and an updated design).
Just my 2 cents. I find unless an item has significant sentimental value, it is often much simpler to either cover over or make a new whatever. Especially if the item is plywood.
Posted: Tue Dec 11, 2012 5:26 pm
by randythewoodchuck
I actually wondered that myself. Might be easier just make a couple of doors. But the cabinet is in the same shape, and would be very difficult to replace without destroying the tile around it. So, I figure I can do the doors and make my mistakes there before starting on the cabinet. I can replace the doors if necessary.