Dead animal in the shop

Moderator: admin

paul heller
Gold Member
Posts: 288
Joined: Thu Jul 20, 2006 7:41 pm
Location: Arvada, CO

Post by paul heller »

Perhaps use one of those masks with the two filter cans? You know --- the ones that are used for toxic chemicals. I forget what they are called. At least it would allow you to get back there to find the dead animal.

Awful story. Good luck.

Paul
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

I would go with the dog idea. Dogs just love to roll in things that stink. Let a dog in your shop and watch him when he gets all excited and starts rubbing his nose on something grab him. The dead whatever will right there.

Second best idea is let a vulture in your shop. A good hungry vulture will seek out the died carcass and clean up the mess real quick.

If both these fail use gasoline. Slosh some in your shop, and toss in a match. Let the fire get well established before you call the fire department and tell your insurance you were trying to rid the place of a rotten smell. :D
Ed in Tampa
Stay out of trouble!
baddlad
Gold Member
Posts: 94
Joined: Wed Apr 08, 2009 8:44 pm
Location: Huntington Beach CA

Post by baddlad »

I had a dead rat in my attic that I couldn't find, and it was raining maggots in the kitchen making my wife crazy with bleaching everything so I was motivated. Anyway I called an exterminator and they seem to be good at finding dead things. It was worth the money not too much maybe $70 or so.
Still couldn't make a sandwich on the counter under that light where the maggots were falling for a month after. Good luck though I remember the stench well.
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

1) Use any of the methods given to LOCATE the dead animal.

2) Remove the dead animal.

3) Apply rubbing alcohol to any item that still smells. It works pretty much instantly, but knot until you remove the cause.

Your only other choice is to put up with the smell until it goes away on it's own.
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

You guys all got clear off course on this one. :)
The only way to deal with oders in the wood shop is a quick big project using aromatic red ceder... :D :D :D
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

I didn't see Dusty weigh in on this one then I thought, heck, how long does it take to completely mummify a dead varmint in Tuscon? Maybe an hour? :D
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

robinson46176 wrote:I didn't see Dusty weigh in on this one then I thought, heck, how long does it take to completely mummify a dead varmint in Tuscon? Maybe an hour? :D


Once dead the stench becomes noticeable in a hurry but for some reason it doesn't diminish in a hurry.

Almost always, when I have that problem, it is the result of a pack rat that has gotten into the poisoned bait. I have had that problem for a couple years now but I believe I may be seeing some success in my efforts to drive them away.

Within the boundary of my property, I have eliminated all of the neat places for them to build nests. I have cut all of the cactus so that you can see under it (no place for them to hide). I have eliminated all of the rock piles (eliminating nesting locations). I have cut all of the cactus back away from the foundation and the the fences (making it easy for the bobcats and cyotes to move fast).

But even then I smell a dead rat now and then.

I'm hoping now for a couple bull snakes to take up residence and that will eliminate the rats.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Gene Howe
Platinum Member
Posts: 3219
Joined: Wed Jul 26, 2006 7:52 pm
Location: Snowflake, AZ

Post by Gene Howe »

dusty wrote:Once dead the stench becomes noticeable in a hurry but for some reason it doesn't diminish in a hurry.

Almost always, when I have that problem, it is the result of a pack rat that has gotten into the poisoned bait. I have had that problem for a couple years now but I believe I may be seeing some success in my efforts to drive them away.

Within the boundary of my property, I have eliminated all of the neat places for them to build nests. I have cut all of the cactus so that you can see under it (no place for them to hide). I have eliminated all of the rock piles (eliminating nesting locations). I have cut all of the cactus back away from the foundation and the the fences (making it easy for the bobcats and cyotes to move fast).

But even then I smell a dead rat now and then.

I'm hoping now for a couple bull snakes to take up residence and that will eliminate the rats.
Dusty,
Get a book called Going Back to Bisbee. Written by a resident of the Old Pueblo. In it he tells a hilarious story about his battles with rock squirrels and his eventual savior. Your bull snake isn't too far off the mark.
Gene
Gene

'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Mark
HOW does the shop smell now?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
mbcabinetmaker
Platinum Member
Posts: 1627
Joined: Thu Jul 20, 2006 6:18 am
Location: Greer SC

Post by mbcabinetmaker »

beeg

It is much better although I never found any remains. I have left the back door open with a fan running since the discovery. I can actually walk through there without gaging. In another week it will probably just be a bad memory.
****************
****************

Mark

2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
Post Reply