Page 3 of 3
Posted: Sun Jul 22, 2012 10:03 am
by mountainbreeze
I made my workmench out of MDF and I finished it with Minwax Tung Oil Finish (because that's what I has on the shelf not being used). It put a nice finish on the MDF. Afterward, I applied 3 coats of JPW. It's a somewhat slick surface which I guess could be undesirable in some cases but I like it because glue won't stick to it.
Posted: Sun Jul 22, 2012 11:17 am
by beeg
mountainbreeze wrote:Afterward, I applied 3 coats of JPW.
Actually you applied one coat and removed two.
Posted: Sun Jul 22, 2012 4:17 pm
by mountainbreeze
beeg wrote:Actually you applied one coat and removed two.
Technically, I applied
3 coats and removed 2.
Posted: Sun Jul 22, 2012 5:58 pm
by JPG
mountainbreeze wrote:Technically, I applied
3 coats and removed 2.
Regardless, you are
left with one 'coat'.
Posted: Tue Jul 24, 2012 4:48 pm
by easterngray
Nice job on the bench! Looks great!
Posted: Tue Jul 24, 2012 9:21 pm
by saminmn
Much thanks for all the supportive comments!! They added to my enjoyment of the project.