My NOS Mark V 500
Posted: Sat Jun 09, 2012 6:09 am
First, many thanks to all the guys here (Dusty, JPG40504, and more than I can remember) that taught me what to look for and how to inspect a used Mark V before purchasing. I have been looking for a Mark V for some time even before joining the forums here. The information I have learned so far has been invaluable.
So here is my quick Mark V story. After calling about several ads for Shopsmiths in the DFW (Dallas/Ft. Worth) area, I came across an add for a Shopsmith Mark V that simply stated: "Shopsmith 5-in-1, good condition call Jim 903-xxx-xxxx, $600. As he was not to far from my home (about 55 miles) I decided what the heck I would call him and go look. On the phone he told me he was 71, inherited the Mark V from his uncle when he passed away, and after having a heart bypass he could not get around good enough to use the Mark V.
Come to find out when I get there an start talking to him, his uncle purchased the machine new in 1983 (verified by serial number) as he always wanted one. Not long after purchasing he died and it sat at his aunts home in the garage for more than 20 years. When the aunt died it went to Jim. As he had a full shop of other power tools, it sat in his shop untouched until about 5 years ago. He said he used the saw twice when he first got it but as he had no need for it at the time it sat in the back corner of his shop. He stated "It had a bandsaw and some sore of joiner/planer thing", so I was interested. Last year he had a CABG (coronary artery bypass graft) and now cannot get out to his shop to do anymore woodworking so he sold off all his tools, but no one seemed interested in the Mark V.
He had it moved to his garage last year, so to be honest I was not expecting much, but when he opened the garage door and I saw it sitting against the wall with what looked like 2" of dust and cobwebs on it, you should have seen my smile. The way tubes were perfect, no rust, but definately a patina, head stock slide smoothly, pulled it away from the wall and plugged it in just long enough to make sure the motor ran and the speed changer functioned normally. It roared like like a lion, smooth an throathy as I went through the dial, I quickly turned it off.
Then he showed me the accessories, bandsaw and joiner, they both looked brand new. He also had a large cardboard box filled with smaller cardboard boxes all taped up stamped Shopsmith. I was blown away, the coupler for the bandsaw and joiner still in the original clear plastic tube with the lid taped, a dado blade still in the plastic case taped up, wood chisel set in original box, yes you guessed it still taped up!
Anyway, I must admit I felt like Indiana Jones in 'Raiders of the Lost Ark' going through all that stuff. After I purchased the machine, Jim told me that i was the only person who looked it, that apparently knew what it was and how it functioned (thanks to you guys). So anyway, got it home, put it in my father-in-laws garage for now. Would love to tear into it and clean and lube the machine but it will have to wait for a few days as I have other plans to help a few friends with a project, and a man is only as good as his word. Posted the pics of my find below, sorry they are from my smartphone.....Thanks again to everyone who helped me find this gem.
So here is my quick Mark V story. After calling about several ads for Shopsmiths in the DFW (Dallas/Ft. Worth) area, I came across an add for a Shopsmith Mark V that simply stated: "Shopsmith 5-in-1, good condition call Jim 903-xxx-xxxx, $600. As he was not to far from my home (about 55 miles) I decided what the heck I would call him and go look. On the phone he told me he was 71, inherited the Mark V from his uncle when he passed away, and after having a heart bypass he could not get around good enough to use the Mark V.
Come to find out when I get there an start talking to him, his uncle purchased the machine new in 1983 (verified by serial number) as he always wanted one. Not long after purchasing he died and it sat at his aunts home in the garage for more than 20 years. When the aunt died it went to Jim. As he had a full shop of other power tools, it sat in his shop untouched until about 5 years ago. He said he used the saw twice when he first got it but as he had no need for it at the time it sat in the back corner of his shop. He stated "It had a bandsaw and some sore of joiner/planer thing", so I was interested. Last year he had a CABG (coronary artery bypass graft) and now cannot get out to his shop to do anymore woodworking so he sold off all his tools, but no one seemed interested in the Mark V.
He had it moved to his garage last year, so to be honest I was not expecting much, but when he opened the garage door and I saw it sitting against the wall with what looked like 2" of dust and cobwebs on it, you should have seen my smile. The way tubes were perfect, no rust, but definately a patina, head stock slide smoothly, pulled it away from the wall and plugged it in just long enough to make sure the motor ran and the speed changer functioned normally. It roared like like a lion, smooth an throathy as I went through the dial, I quickly turned it off.
Then he showed me the accessories, bandsaw and joiner, they both looked brand new. He also had a large cardboard box filled with smaller cardboard boxes all taped up stamped Shopsmith. I was blown away, the coupler for the bandsaw and joiner still in the original clear plastic tube with the lid taped, a dado blade still in the plastic case taped up, wood chisel set in original box, yes you guessed it still taped up!
Anyway, I must admit I felt like Indiana Jones in 'Raiders of the Lost Ark' going through all that stuff. After I purchased the machine, Jim told me that i was the only person who looked it, that apparently knew what it was and how it functioned (thanks to you guys). So anyway, got it home, put it in my father-in-laws garage for now. Would love to tear into it and clean and lube the machine but it will have to wait for a few days as I have other plans to help a few friends with a project, and a man is only as good as his word. Posted the pics of my find below, sorry they are from my smartphone.....Thanks again to everyone who helped me find this gem.
