Page 1 of 1

This weeks project

Posted: Fri Feb 21, 2014 7:58 pm
by STB
The first picture is of a step stool that I made several years ago. Unfortunately time marches on. Some of the fun things that happen is its harder to step up and the sense of balance is not what it once was. SWMBO asked me to make a new step stool that was shorter than the one she was using. My first thought was to cut the legs on the old step stool. That was not the solution she needed a taller stool to reach the upper cupboards.
My thought was a two step stool with a post with a round knob on top fastened to the side to help with balance while stepping up. During the development phase I clamped a post on the old step stool to get some idea of the length of the balance pole. My wife suggested rather than placing the balance pole on the side put in the middle of the back so she could place both hands on the support post when stepping up. She also wanted hooks that could hold objects while stepping up on the upper step. The second picture is what I come up with. The third picture is the handle with horns rather than hooks on the side.

[ATTACH]24154[/ATTACH]

[ATTACH]24155[/ATTACH]

[ATTACH]24156[/ATTACH]

Posted: Fri Feb 21, 2014 8:33 pm
by charlese
Very clever, Glenn!:) Congratulations to both of you for this design.

Love the dovetail joinery!

Posted: Fri Feb 21, 2014 11:31 pm
by reible
I like the innovation you applied to this update. Thanks for sharing.

Ed

Posted: Sat Feb 22, 2014 12:39 am
by JPG
Clever use of a dovetail!!!!

May it be used for many years to come!

Impossible dovetail

Posted: Sat Feb 22, 2014 11:37 am
by STB
JPG40504 wrote:Clever use of a dovetail!!!!

May it be used for many years to come!
After I had committed to this dovetail I realized that this would be the perfect place for an impossible dovetail joint.http://www.youtube.com/watch?v=H69nvjtobxk

Posted: Sat Feb 22, 2014 1:19 pm
by JPG
stumpbuster wrote:After I had committed to this dovetail I realized that this would be the perfect place for an impossible dovetail joint.http://www.youtube.com/watch?v=H69nvjtobxk


Hope you woulda made it this way.]http://www.youtube.com/watch?v=xg1J3tdfUFY[/URL]

Posted: Sun Feb 23, 2014 6:37 am
by newportcycle
Clever. Very nice joinery