What are the bolts for? Mark V

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
ibskot
Gold Member
Posts: 185
Joined: Thu Dec 03, 2009 10:15 pm

What are the bolts for? Mark V

Post by ibskot »

I have some bolts threaded into the bottom of my table saw table. They are not holding anything. Any clue what they might be for? I'd show pics but I am having trouble uploading for some reason.
Top
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Without a pic it's hard to say. Is your pic less than 1.43mb?
Those bolts may be the table leveling bolts for when your in drill press mode?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
Top
ibskot
Gold Member
Posts: 185
Joined: Thu Dec 03, 2009 10:15 pm

Post by ibskot »

beeg wrote:Without a pic it's hard to say. Is your pic less than 1.43mb?
Those bolts may be the table leveling bolts for when your in drill press mode?
No, it exceeds that limit. I tried photo bucket too as I use that in another forum but it won't take it.
Top
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Post by joedw00 »

Open in paint and reduce the size, then save it.
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
Top
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

ibskot wrote:I have some bolts threaded into the bottom of my table saw table. They are not holding anything. Any clue what they might be for? I'd show pics but I am having trouble uploading for some reason.
The other magic "size" number is 1024x768 which is the max. that you can post here.

Here are a couple of pictures showing some bolts for you to look at. If these are the ones then they are for adjustment in drill press mode so the table is stopped at 90 degrees, (there are also stops at 45 degrees) this is just for your information.

[ATTACH]26146[/ATTACH]

[ATTACH]26147[/ATTACH]

Ed
Attachments
IMG_4773msc.jpg
IMG_4773msc.jpg (115.03 KiB) Viewed 5151 times
IMG_4772msc.jpg
IMG_4772msc.jpg (100.15 KiB) Viewed 5151 times
Top
ibskot
Gold Member
Posts: 185
Joined: Thu Dec 03, 2009 10:15 pm

Post by ibskot »

Here is a pic. Thanks for the help.
Attachments
IMG_20140908_192747.png
IMG_20140908_192747.png (399.93 KiB) Viewed 5002 times
Top
ibskot
Gold Member
Posts: 185
Joined: Thu Dec 03, 2009 10:15 pm

Post by ibskot »

Well...I thought the pic showed up. Thanks for posting that pic. I was hoping to use those bolts to attach an outfeed table.
Top
roopurt5
Gold Member
Posts: 151
Joined: Sat Mar 29, 2014 3:04 am
Location: Laveen, AZ
Contact:
Contact roopurt5

Post by roopurt5 »

Those are the stops for the table tilt.
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

reible wrote:The other magic "size" number is 1024x768 which is the max. that you can post here.
. . .

Ed
Admin increased that to 1024 x 1024. i.e. 1024 either/both hor/vert.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Beginning Woodworking”