Page 1 of 1
Saw Blade Sharpening
Posted: Sat Sep 20, 2014 7:46 pm
by tvhorman
I managed to obtain 35 blades for a song but several need sharpening. Being a "do it yourself" type of guy, what do you guys recommend as a sharpener that will do the 1.25" arbor blades? Seems like a lot of them top out at 1".
Posted: Sat Sep 20, 2014 10:16 pm
by charlese
That's what the HF unit says, but I've found the clamping cone reached over 1 1/4" and holds the Shopsmith blades firmly.
I had thought I would have to add a large fender washer, but there was no need to do that.
If in doubt, ask the workers a HD to open the box so you can measure the top of the cone shaped clamp.
Posted: Sun Sep 21, 2014 7:19 pm
by tvhorman
OK, Thanks!