I will update this thread, as I continue building this second project.
These picket sections, began as Mug Staves. And when I saw just how much work was involved in creating these staves, I choose to scrap that idea and therefore, these same staves became pickets.
Water pump, bedside table
Moderator: admin
Water pump, bedside table
- Attachments
-
- Pickets.jpg (390.07 KiB) Viewed 6469 times
I am a true blue Xylophiliac, who also is a Nemophiliac 
Re: Water pump, bedside table
Dry fit of pickets on base.
All lumber is air dried, for 10 to 15 years. All lumber was rough cut. Species, Oak, Hickory and Black Walnut.
All lumber is air dried, for 10 to 15 years. All lumber was rough cut. Species, Oak, Hickory and Black Walnut.
- Attachments
-
- PicketsnBase.jpg (416.57 KiB) Viewed 6466 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Water pump, bedside table
Drill press mode, using a 7/8" Forstner bit.
Watering trough.
Watering trough.
- Attachments
-
- Forstner.jpg (47.61 KiB) Viewed 6465 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Water pump, bedside table
Horizontal boring, this was a two ended bore.
- Attachments
-
- HorizontalBoring.jpg (56.62 KiB) Viewed 6465 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Water pump, bedside table
Success.
- Attachments
-
- HorizontalBoring2.jpg (50.99 KiB) Viewed 6465 times
I am a true blue Xylophiliac, who also is a Nemophiliac
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Water pump, bedside table
Whatsa 'Mug Stave'? 
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Water pump, bedside table
Accuracy, horizontal and drill press bore... meet at the intersection.
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Water pump, bedside table
Think of a whiskey barrel. They are comprised of staves. A mug stave, is simply smaller.
I will build mugs, but in a different fashion.
I will build mugs, but in a different fashion.
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Water pump, bedside table
Accuracy.
- Attachments
-
- Accuracy.jpg (42.15 KiB) Viewed 6461 times
I am a true blue Xylophiliac, who also is a Nemophiliac
Re: Water pump, bedside table
More to come, tomorrow!
I am building multiple copies of these lamps.
The first six are 100% hardwoods and then next six will be 100% softwoods. All but one (a hardwood variety) will then be taken to a flea market, during Memorial Day, weekend.
I am building multiple copies of these lamps.
The first six are 100% hardwoods and then next six will be 100% softwoods. All but one (a hardwood variety) will then be taken to a flea market, during Memorial Day, weekend.
I am a true blue Xylophiliac, who also is a Nemophiliac