Dead animal in the shop

Moderator: admin

mbcabinetmaker
Platinum Member
Posts: 1627
Joined: Thu Jul 20, 2006 6:18 am
Location: Greer SC

Dead animal in the shop

Post by mbcabinetmaker »

I have a dead animal somewhere in the back room of my shop that I cannot find. The stench is awful, I can hardly go back there without holding my breath. Does anyone know how to eliminate the smell?
****************
****************

Mark

2017 Power Pro Mark 7
2002 50th anniversary model 520
and a few other woodworking tools.
paul269
Gold Member
Posts: 142
Joined: Sat Dec 29, 2007 8:00 pm
Location: Lafayette, Indiana

Post by paul269 »

Breathe in through the mouth and out through the nose. Remove all decomp material first and all that it has contaminated. Then depending on the surface use odorxit.

http://www.odorxit.com/?odorxit-welcome ... DQodbQ6S_w


Kills primer does a good job of stoping odor too, but the surface must be cleaned first.
kalynzoo
Platinum Member
Posts: 829
Joined: Sat Jan 19, 2008 11:02 pm
Location: Los Angeles, CA

Post by kalynzoo »

Lots and lots of ventilation. A couple of buckets of water and Pinesol may also help cover the odor to permit a thorough inspection of the area to remove the dead animal. Leave the windows and doors open and turn on the fans. Good Luck.
Gary Kalyn
Kalynzoo Productions
Woodworking
Porter Ranch/Northridge
Los Angeles, CA
User avatar
fixit
Gold Member
Posts: 439
Joined: Fri Jul 21, 2006 8:44 pm
Location: La Vernia, TX

Post by fixit »

This won't be a LOT of help but the only way I know about is to FIND the dead animal. I had a dead cat under our deck several years back. Fortunately it was outside but unfortunately, the strongest odor seemed to be around our back door.

Had to take off about ten deck boards before locating the thing. It wasn't right by the back door but about ten feet away. The prevailing breeze here (such as it is) blew the odor right at the back door.

The good news is once you locate and remove the carcass the smell departs rather quickly unless it has decomposed a great deal and liquified and soaked into any wood. If so you will have to replace that wood to eliminate the odor.
----------------------------------------
Leonard
La Vernia, TX
Wood Goods - Custom Woodwork
EMAIL: woodgoods "at" lavernia "dot" net
PowerPro 520, PowerPro 500 (was my father's 500), SS jointer, SS Mark V mount planer, SS bandsaws (2), belt sander, scroll saw, SS jig saws (2), strip sander, Jointech system, 12" Delta Compound Miter Saw, a small collection of routers, a router table and a Delta Unisaw. All in a 24' x 24' shop.
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Toss a skunk into the back room.:D
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

beeg wrote:Toss a skunk into the back room.:D
Yep! THAT oughta cover it up!:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
dan1999
Gold Member
Posts: 104
Joined: Sat Jul 04, 2009 8:05 pm
Location: Montreal

Odour

Post by dan1999 »

If you got a dog let it out in that area, it may de drawn to the stink(they love dead things)and then get the dog away from the carcass once it finds it.
Or you can let a vulture into the shop they love to eat dead things.

Dan
Mark V 520,Mark V 510(2),Mark V 500(2) Dust Collector(2), Jointer(2), bandsaw(2), jigsaw, beltsander, biscuit joiner(2) Lathe Duplicator, RingMaster, Pro planer
tnerb
Gold Member
Posts: 145
Joined: Fri Feb 22, 2008 1:04 am
Location: Belen, NM

Post by tnerb »

dan1999 wrote:If you got a dog let it out in that area, it may de drawn to the stink(they love dead things)and then get the dog away from the carcass once it finds it.
Or you can let a vulture into the shop they love to eat dead things.

Dan

Yup! A Vulture would do it....... Ya can rent em from your local 'Rent A Vulture') store!
User avatar
mickyd
Platinum Member
Posts: 2999
Joined: Mon Feb 09, 2009 1:18 pm
Location: San Diego, CA
Contact:

Post by mickyd »

Vicks Vapo-Rub on your nostrils for the next 3 weeks.
Mike
Sunny San Diego
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

mickyd wrote:Vicks Vapo-Rub on your nostrils for the next 3 weeks.

How about that! A dead animal made Mike come out of hiding!:D

Been pretty quiet this week! Hope you are busy, NOT feeling poorly!:)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply