New SS MV 500 Owner Need HELP!! :(

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
crushgroovin
Gold Member
Posts: 30
Joined: Sun May 23, 2010 9:18 pm
Location: Renton, WA

New SS MV 500 Owner Need HELP!! :(

Post by crushgroovin »

I just became a proud owner of a Shopsmith Mark V yesterday. I am very excited to get using it. I have already put a blade on the table saw and fired it up. Now is where I have a problem.

The Blade is stuck on the spindle! I can't get it off for the life of me. I have unscrewed the little screw but it just won't budge. Anyone have any suggestions on getting the darn blade off of the spindle????

:confused:
Top
User avatar
albie
Gold Member
Posts: 68
Joined: Sat Dec 09, 2006 9:54 pm
Location: Orlando, FL

Post by albie »

Take a look at aprevious posting

Pay attention to Bill Mayo's advise in post #7

Oh, yea. Welcome to the forum...
Al B
Shopsmith Greenie (my late Dad's); My 520, 6" Belt Sander, Bandsaw, Jointer, pro planer, scroll saw, Jig saw, strip sander, router table, OPR, dust collector, power station, & power stands
Top
crushgroovin
Gold Member
Posts: 30
Joined: Sun May 23, 2010 9:18 pm
Location: Renton, WA

Thanks!

Post by crushgroovin »

Many thanks for the link! I knew there had to be a thread here about it I just couldn't find it. I will give it a try & hopefully it will work. :D
Top
User avatar
skou
Platinum Member
Posts: 1944
Joined: Fri Feb 16, 2007 2:53 am
Location: Mesa (near Phoenix) Az

Post by skou »

albie wrote:Take a look at aprevious posting

Pay attention to Bill Mayo's advise in post #7

Oh, yea. Welcome to the forum...
Man, that was VERY helpful.

I really liked Nick's post. In fact, I just "favorite"d his website.

steve
Top
Post Reply

Return to “Beginning Woodworking”