Shopsmith Forums

Posted: **Mon Dec 06, 2010 8:12 pm**

First post, I have been searching for wood tools so that I can make patterns for the foundry I am building, so I bought a 10ER from this nice little old lady. Got a great deal too, only $50, comes with all kinds of pulleys, the jigsaw, the jointer, the wheels, blades, original sales brochure, and the original manuals for the 10ER as well as all of the add ons, and the original packing slip. The problem is, it does not have the drill chuck. Where can I find a relatively cheap replacement? I've done some searching, but I haven't been able to tell if any of the Morse taper sizes will fit, or even if the 1/2 chcuck listed for the mark V on the SS website will. Any help would be appreciated, thanks!

Posted: **Mon Dec 06, 2010 8:15 pm**

filonin_2 wrote:First post, I have been searching for wood tools so that I can make patterns for the foundry I am building, so I bought a 10ER from this nice little old lady. Got a great deal too, only $50, comes with all kinds of pulleys, the jigsaw, the jointer, the wheels, blades, original sales brochure, and the original manuals for the 10ER as well as all of the add ons, and the original packing slip. The problem is, it does not have the drill chuck. Where can I find a relatively cheap replacement? I've done some searching, but I haven't been able to tell if any of the Morse taper sizes will fit, or even if the 1/2 chcuck listed for the mark V on the SS website will. Any help would be appreciated, thanks!

Ebay, it takes a 5/8" straight bore chuck. The Mark V chuck will work.

Posted: **Mon Dec 06, 2010 8:35 pm**

Thanks for the quick reply. So, something like this?
http://cgi.ebay.com/milling-machine-Jac ... 43a388661c Forgive my ignorance if this isn't the right one, I have no woodworking experiance at all.

Posted: **Mon Dec 06, 2010 8:38 pm**

filonin_2 wrote:Thanks for the quick reply. So, something like this?
http://cgi.ebay.com/milling-machine-Jacobs-Multicraft-Drill-Chuck-cap-1-2-/290506434076?pt=BI_Tool_Work_Holding&hash=item43a388661c Forgive my ignorance if this isn't the right one, I have no woodworking experiance at all.

No, 5/8" bore. One like this: http://www.shopsmith.com/ownersite/catalog/dr_chuck.htm

Posted: **Mon Dec 06, 2010 8:46 pm**

SDSSmith wrote:No, 5/8" bore. One like this: http://www.shopsmith.com/ownersite/catalog/dr_chuck.htm

Ok, just to be sure I have this correct before I buy the wrong thing, I am looking for a 5/8 bore chuck without a shank, right?

Posted: **Mon Dec 06, 2010 8:53 pm**

filonin_2 wrote:Ok, just to be sure I have this correct before I buy the wrong thing, I am looking for a 5/8 bore chuck without a shank, right?

You are correct.

Posted: **Mon Dec 06, 2010 11:44 pm**

SDSSmith wrote:You are correct.

Thanks for the help!

Posted: **Tue Dec 07, 2010 2:01 am**

http://cgi.ebay.com/Shopsmith-Jacobs-Chuck-and-Key-used-but-great-shape-/190476816483?pt=LH_DefaultDomain_0&hash=item2c594d9063

http://cgi.ebay.com/Shopsmith-Jacobs-Drill-Chuck-w-Key-/170575896271?pt=LH_DefaultDomain_0&hash=item27b71d9ecf

http://cgi.ebay.com/Shopsmith-Jacobs-Drill-Chuck-/180595243743?pt=LH_DefaultDomain_0&hash=item2a0c50badf

http://cgi.ebay.com/Shopsmith-Jacobs-Chuck-Very-nice-clean-chuck-/220705005660?pt=BI_Tool_Work_Holding&hash=item33630b205c

Good Luck! The last one was probably originally on a Model 10! IMHO it is a better chuck!

Shopsmith Forums

Just bought a 10ER and Im missing a part

Just bought a 10ER and Im missing a part