Page 1 of 1
For lack of a chuck
Posted: Sun Dec 18, 2011 3:27 am
by fiatben
Can I turn a 1/2" tenon on my smaller stuff and then mount it in the drill chuck that fits the MT1 headstock of my little CarbaTec? Does that even make sense to anyone besides me???
Posted: Sun Dec 18, 2011 9:53 am
by holsgo
Makes some sense. What stuff are you referring to making a 1/2 tenon on?
Posted: Sun Dec 18, 2011 1:09 pm
by JPG
fiatben wrote:Can I turn a 1/2" tenon on my smaller stuff and then mount it in the drill chuck that fits the MT1 headstock of my little CarbaTec? Does that even make sense to anyone besides me???
Anything that 'gits er dun' makes sense!;)
Posted: Sun Dec 18, 2011 11:43 pm
by damagi
what you are describing makes sense. One thing to note is that most drill style chucks are not designed to handle much lateral force. Its the same reason why many people prefer to use the 1/4" router chuck for pen mandrels on the Shopsmith even though the drill chuck could work.
In general, it should be fine. Another option that people use sometimes is a dowel.
Basically, if you let the tool do the works and keep it sharp then it will probably be fine.
Posted: Mon Dec 19, 2011 12:24 pm
by terrydowning
You can also make a jam chuck. Pretty easy if you have a MT drive end on an existing lathe. For the SS, you need to use a face plate. Google "make a jam chuck" for tons of articles.