Schedule a Meeting · Talk to a real woodworker: +1 937-890-5197 · 8:00AM – 4:30PM ET

10 ER Shaper Fence

e2512

I moved and I can't find anything.

Does anyone have the O.D. of the original shaper fence (10 ER) washer/spacer?

I do know the I.D is 1/4" and the thickness is 1/4". The part number is 129-21 per the manual.

Thanks in advance.

Tom

rpd

Could you post a copy of your manual and a photo of your fence.

The manual I found a manual on Vintage Machinery doesn't show that part number. http://vintagemachinery.org/pubs/338/2712.pdf

That said there was more that one version of the shaper fence made.

JPG

FWIW that is a Mark 5 shaper fence which was also used on A 10 E/R after the M5 was introduced.

e2512

Somebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.

jsburger

e2512 wroteSomebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.

Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-10ER-Shaper-Fence-Spacers-/222371822047?hash=item33c664b9df:g:VS8AAOSwYHxWIbpz

BuckeyeDennis

jsburger wrote
e2512 wroteSomebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.
Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-10ER-Shaper-Fence-Spacers-/222371822047?hash=item33c664b9df:g:VS8AAOSwYHxWIbpz

e2512 is Hogwinslow. ;)

http://shopsmith.com/ss_forum/viewtopic.php?p=164049#p164049

jsburger

BuckeyeDennis wrote
jsburger wrote
e2512 wroteSomebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.
Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-10ER-Shaper-Fence-Spacers-/222371822047?hash=item33c664b9df:g:VS8AAOSwYHxWIbpz
e2512 is Hogwinslow. ;)

http://shopsmith.com/ss_forum/viewtopic.php?p=164049#p164049

If that is the case why does he have 6 sets listed for sale on eBay? :confused: :confused: :confused: I know he was on vacation over the holidays but I got a personal email from him last week. No mention of moving.

BuckeyeDennis

jsburger wrote
BuckeyeDennis wrote
jsburger wrote

Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-10ER-Shaper-Fence-Spacers-/222371822047?hash=item33c664b9df:g:VS8AAOSwYHxWIbpz
e2512 is Hogwinslow. ;)

http://shopsmith.com/ss_forum/viewtopic.php?p=164049#p164049
If that is the case why does he have 6 sets listed for sale on eBay? :confused: :confused: :confused: I know he was on vacation over the holidays but I got a personal email from him last week. No mention of moving.

Beats me. I simply remembered that thread I linked to.

rpd

Sorry, didn't have a lot of time before going to work yesterday and got the wrong manual. :o

I have now found the correct manual on Vintage Machinery. http://vintagemachinery.org/pubs/338/2705.pdf

This manual is for the 10er shaper fence with the metal fences. The fence I have has the wooden fences but looks pretty similar. Unfortunately it doesn't have the spacers installed and I can't see any in the "box of goodies" that came with it. So, I'm afraid I can't be of help on this one. :(

jsburger

The outside diameter of the spacers is 1 1/4".

e2512

Thanks everyone!

bshaffer50

e2512 do you have any of the washers for the 10Er shaper fence?

Thanks,

Bill

chapmanruss

I don't know if Tom sells those spacers for the Jointer/Shaper Fence any longer. I haven't seen them listed on ebay for some time. This thread is over 5 years old so the link for ebay is out of date.

You could easily make a pair. Make them out of 1/4" thick wood using a 1-1/4" hole saw having a 1/4" pilot bit. They don't need to be exactly 1-1/4" in diameter. You could make a pair out of aluminum that is 1/4" thick and 1-1/4" square with a 1/4" hole in the center. They wouldn't really need to be round.

bshaffer50

chapmanruss,

Tom is not currently making the spacers.

Thanks for the dimensions