Schedule a Meeting · Talk to a real woodworker: +1 937-890-5197 · 8:00AM – 4:30PM ET

Replacement safety key or solution for old Mark 7 Headstock

mgailey63

I was able to get a Shopsmith Mark 7 (I am told the old model) - not the one with the push button panel. The problem is, it does not have the safety key that is an actual metal key that goes into a lock located underneath the Rev/Stop/Fwd switches on the headstock.

The folks at Shopsmith.com said they did not carry the replacement key or even the whole switch assembly with the key and to post on this forum and I would likely get an answer.

Does anyone know of a solution to my problem?

I thought I saw a post in a google search that recommended getting a copy from another owner to see if that would work but that is the only recommendation I saw so far other than hacks to work around the safety switch.

I posted a picture of the switch and lock if that helps.

Any ideas are most welcome. Thanks in advance.

shopsmith mark 7 safety key.jpg

Steamdragon

Pull the key block out and take it to a locksmith.

heathicus

I don't have the Mark 7, but I have the Sawsmith which takes the same key. I can have one cut for you. PM me your address and I'll get it in the mail.

mgailey63

Would the locksmith be able to make a key or would he need to replace the whole lock mechanism? I am not sure how the lock is tied into the switches to keep it from working. I would just go to the hardware store and get a lock and replace it if it was a simple cabinet lock but I suspect it is not. And I have not been able to find a replacement part for the lock mechanism on any shopsmith or replacement parts website.

Thanks for the response. All input on options is much appreciated.

mgailey63

It looked like there might be a similar item for the shopsmith dust collector. Do you know if that might work as well? I do not have one but I might be able to find a replacement key or part for that.

jsburger

mgailey63 wroteWould the locksmith be able to make a key or would he need to replace the whole lock mechanism? I am not sure how the lock is tied into the switches to keep it from working. I would just go to the hardware store and get a lock and replace it if it was a simple cabinet lock but I suspect it is not. And I have not been able to find a replacement part for the lock mechanism on any shopsmith or replacement parts website.

Thanks for the response. All input on options is much appreciated.

A good lock smith should be able to make a key.

JPG

The key is the same as used on the sawsmith. Take Heathicus up on his offer.

I have had copies made - very inexpensive.

BTW you have a Mark VII (ignore that tag that says Mark 7).

mgailey63

I did take him up on the offer. I am waiting to see if that works first.

And yes it does say Mark VII and not 7. Still new to the tool and forum

Thanks much.

JPG

mgailey63 wroteI did take him up on the offer. I am waiting to see if that works first.

And yes it does say Mark VII and not 7. Still new to the tool and forum

Thanks much.

It WILL work!

A mystery as to why the tags are 'both' ways.

heathicus

mgailey63, check your private message inbox. I've sent you several messages, but they're still showing unread.

mgailey63

Heathicus saved the day. He sent a key as promised and it worked!!

Thanks you very much sir - I cannot wait to use all of the tool attachments and work on projects with my sons.

Mike

King2459

heathicus wrote I don't have the Mark 7, but I have the Sawsmith which takes the same key. I can have one cut for you. PM me your address and I'll get it in the mail.

Hello

I saw your post and was wondering if you are able to help me out as I have a Shopsmith Mark IV but missing it’s key. Would you be able to help? Thank you.

Ken

Email : Kstrawnmail@ gmail.com

JPG

king2459 check your e-mails.