Schedule a Meeting · Talk to a real woodworker: +1 937-890-5197 · 8:00AM – 4:30PM ET

Events Forum Live Demo

My Growth Rings with Scott Markwood

thedovetailjoint

Thanks for the encouragement, Chad.

thedovetailjoint

[quote="JPG"But but but he did not do so in the 'stumped ' video that I was referring to. Why do I think Scott is both in NC and OH?? :D[/quote]

You can take the boy out of Ohio...

JPG

thedovetailjoint wrote
JPG wrote Yeah ya still did not cut anything with the twisted blade!!!

As for the time . . . . "Why is there never enough time to do things the right way the first time, but, there is always time to do it over (and over and over. . .)? :D

Keep up the go . . .work! :cool:

So ya gonna start a "roots" series for "stumped" omissions? :p ?
By the time I added that forgotten clip to the video I realized it was running way too long so you were correct, I didn’t put the video showing to cut. I guess I can put out a very short edited “Shop Short” vid that covers just the twisted blade. I believe that “Roots” is already a thing...

OK rather than down, go up. i.e. branches. :D

I was 'debating' facts. As for elaborating on the 'feat' of cutting narrow boards that are too long to pass between the blade and the 'post', never mind. I share thy whoopdedo opinion. ;) Only appropriate in a 'pinch'.

(yes that is a pun) :rolleyes:

Chad

Watch it here: https://www.youtube.com/watch?v=YRCo2OuL43s

Way back in 2017 I did a video on the "Shopsmith Toolbox", which is the 5/32" hex wrench that we use for most of the settings and conversions on the Shopsmith Mark V and other tools. I've recently been shopping for the latest versions I can find and here they are. Have another to suggest? Leave a comment. Here's the original 2017 video: https://youtu.be/Jd1aduaBvzc

0:00 - Intro

0:48 - Smaller handle T-Handle wrench

1:11 - Economy bent version

1:34 - Adam Savage's favorite ball-end hex driver

2:29 - Klein double-ended wrench

3:20 - An old booboo from using short wrenches

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com/shopsmith-... and http://shopsmith-tool-hunter.blogspot...

DISCLAIMER:

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

Products used in this video (in no particular order)

Smaller handle T-Handle wrench: https://amzn.to/2Z7HVFD

Economy bent version: https://amzn.to/355Xv8K

Adam Savage's favorite ball-end hex driver: https://amzn.to/3lLejaO

Klein double-ended wrench: https://amzn.to/3gYAMgM

Not shown: Elkind T-Handle wrench: https://amzn.to/32TaM1G

#ShopsmithToolBox #ShopsmithWrench #ShopsmithAllenWrench

JPG

I may be a crusty old curmudgen, but I prefer the 'original' version(L shape, no plastic)

Probably the result of using one for almost 60 years. :D

I noticed it was excluded! Mentioned maybe but no video. ;)

Chad

A couple days ago I did score THREE original Shopsmith 4 way bar clamps. 36" long, with the original cast wingnut style handles on the screw end. They are in excellent shape, and the best part was they were FREE to a good home.

Chad

JPG wroteI may be a crusty old curmudgen, but I prefer the 'original' version(L shape, no plastic)

Probably the result of using one for almost 60 years. :D

I noticed it was excluded! Mentioned maybe but no video. ;)

Yeah, it was shown in the 1st video covering the "Shopsmith Tool Box"

I'm right there with you on the "original" version (L shape, no plastic), JPG. I'm a machinist, so using a hex wrench without any plasti-dip or handle of any sort is a daily occurrence for me.

Bondhaus is my 1st. choice, Eklind comes in at a close 2nd. Allen brand (at least a standard machine shop or tool and die shop set from MSC); I have found to be way too soft, and round off easily. Whether they are ball nosed or not.

rlkeeney

I like this one.

https://www.amazon.com/gp/product/B004ITOH9Y/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

There are a couple of situations there are 5/32 set screws that I can't get to with long one. I keep this one on my power stand.

20200906 201249 Toymakers Shop Shosmith Tool Box Klein 5 32 Hex Wrench.resized.jpg

thedovetailjoint

JPG wroteI may be a crusty old curmudgen, but I prefer the 'original' version(L shape, no plastic)

Probably the result of using one for almost 60 years. :D

I noticed it was excluded! Mentioned maybe but no video. ;)

Yes, it was missing when I purchased this Mark V 520, otherwise it would have been in the mix and would have recieved my support. I not only like that I can use either end, but the fact that it gets a little uncomfortable when the setscrew is tight is a good reminder not to go too crazy! Scott

thedovetailjoint

pcd7326 wroteA couple days ago I did score THREE original Shopsmith 4 way bar clamps. 36" long, with the original cast wingnut style handles on the screw end. They are in excellent shape, and the best part was they were FREE to a good home.

LUCKY! I love those clamps.

Chad

Watch it here: https://www.youtube.com/watch?v=rMLmqBYF3a0

In last weekend's video titled "Stupid Bandsaw Trick, Resawing & Straight Sawing with the Shopsmith Bandsaw" I did an awful job editing and left out the critical set-up that would have explained WHY someone might want to twist the blade on their Shopsmith bandsaw, and of course, some viewers noticed. I had planned on adding that "lost footage" to the follow-up mid-week episode of "Stumped Q&A", but because it was already running quite long I decided to only show the set-up but not the actual cut, and of course, some viewers noticed that too!

So here's the entire process, should you choose to attempt it. I don't recommend it, but as I say in the set-up, if you need to make this cut and all you have available to you is the Shopsmith, at least you have this ace up your sleeves!

Here's the entire "Stupid Bandsaw Trick, Resawing & Straight Sawing with the Shopsmith Bandsaw" episode: https://youtu.be/5lqzmibP3vg

And here's the follow-up "Stumped Q&A": https://youtu.be/AHYdzX3kPso

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com/shopsmith-... and http://shopsmith-tool-hunter.blogspot...

Products used in this video (in no particular order):

Timber Wolf 1/2" x 72" 4 TPI bandsaw blade for the Shopsmith bandsaw: https://amzn.to/34ShtU5

"Power Tool Woodworking For Everyone" book: https://amzn.to/355sqBU Be aware that there have been several printings, so make sure that the version you get features the tool you own.

Two options for a "Shopsmith Toolbox" AKA: Long 5/32 Inch Cushion Grip Hex T-Handle T-Key ball-end Allen (hex) wrench: https://amzn.to/3lAx7tg but a better deal might be this twofer deal: https://amzn.to/2Dj7ETO

#Shospmith #ShopsmithBandsaw #StupidShopsmithTrick

Chad

Watch it here: https://www.youtube.com/watch?v=LYfAVRUnqMk

In this episode of "Stumped? Q&A" we will tackle Questions, Comments and Cheepshots from my last video: "The Essential "Shopsmith Toolbox" (Update)" which you can view here: https://youtu.be/YRCo2OuL43s

0:00 - Intro

0:40 - Where to store your "Shopsmith Toolbox" on the Shopsmith Mark V (Thanks Andy!)

1:35 - BONUS: Where to store your Shopsmith SPT Coupling (Thanks again, Andy!)

2:37 - BONUS: Where to store your Drill Chuck Key (Thanks Glen!)

4:56 - Click that bell to really, REALLY Subscribe!

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com/shopsmith-... and http://shopsmith-tool-hunter.blogspot...

Products used in this video (in no particular order)

Klein double-ended wrench: https://amzn.to/3gYAMgM

Super-Strong 1/2" X 1/4" Rare Earth Magnet: https://amzn.to/3hkDv4m

DISCLAIMER:

#ShopsmithToolBox #ShopsmithWrench #ShopsmithAllenWrench

Chad

Watch it here: https://www.youtube.com/watch?v=CBCHalabqGk

Named after the inventor, Mr. Bill Bittner, the Bittner Nut solved the problems that I always had with the knobs on my shop-made Jigs & Fixtures:

They can be expensive,
They can be weak,
That can be uncomfortable to turn, thereby making them hard to tighten or loosen,
You never have them when you need them

The Bittner Nut was shared by Bill during a Shopsmith "Sawdust Session" way back int he late 1980's and these homemade knobs have been irreplaceable in my shop ever since.

0:00 Intro
0:38 Shopsmith Sawdust Sessions
1:33 My favorite hecklers: John Keller, Max Marshall & Bill Bittner
2:05 Bill shares the first "Bittner Nut"
3:07 How to make a "Bittner Nut"
4:45 Demo of the making of "Bittner Nuts"
6:00 Shopsmith T-Nut part #555916 available from http://www.Shopsmith.com
6:30 How to make a "Bittner Knob" (My invention)
9:05 The best thing about the "Bittner Nut"...
9:18 Bill Bittner in his own words

Watch the entire "Sawdust Therapy" video and you'll see a little more of Bill and you'll even get to meet John Keller, another of my favorite hecklers: https://youtu.be/siXRTXyRfcQ

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

#KnurledKnob #BittnerNut #JigAndFixtureHardware

Bittner Nut Bittner Knob MyGrowthRings.jpg

thedovetailjoint

The “Bittner Nut” is one of those “Why didn’t I think of that?” things that was just too good not to share. The “Bittner Knob” was my own mod of the “Bittner Nut” that was a real problem solver. Who hasn’t needed a knob with a male thread that was a different length than one commonly available? Thanks for sharing, Scott

JPG

thedovetailjoint wroteThe “Bittner Nut” is one of those “Why didn’t I think of that?” things that was just too good not to share. The “Bittner Knob” was my own mod of the “Bittner Nut” that was a real problem solver. Who hasn’t needed a knob with a male thread that was a different length than one commonly available? Thanks for sharing, Scott

All we need now is for woodpecker to make a 1/2" nut version of their knobs.(if they do not already)

Chad

JPG wroteAll we need now is for woodpecker to make a 1/2" nut version of their knobs.(if they do not already)

I doubt they would be as cheap to purchase as a "Bittner Nut or Knob" is.

JPG

pcd7326 wrote
JPG wroteAll we need now is for woodpecker to make a 1/2" nut version of their knobs.(if they do not already)
I doubt they would be as cheap to purchase as a "Bittner Nut or Knob" is.

Actually I said that in jest. Fer sure the wp knob would be easier on the hands. But with the wp knob, all you need is either a single nut or a single bolt either of a lesser grade(<<$).

Besides a 1/2" scaled knob would be too big for use with 1/4" threads. :eek:

I am curious how much torque(with a 1/2" wrench) the 1/4" hex nut press fit into the threads of a 1/2" nut would take before the press fit fails. Possibly greater than the 1/4" threads can take????

Gotta make a couple to satisfy my curiosity bump! :cool:

Chad

Watch it here: https://www.youtube.com/watch?v=FBOzLpMLk_c

James Hamilton AKA: Stumpy Nubs posted an excellent video this past weekend talking about safety and saw guard use among Youtube content creators and the myth that using guards is somehow unmanly.

In this video response (of sorts) I go over how to install the modern Shopsmith Mark V and Mark 7 upper and lower saw guards. It's not difficult and it could save your hand.

And always remember, "Don't use remaining fingers as push sticks."

Watch James' excellent video "Table Saw Blade Guard Myths BUSTED!" here: https://youtu.be/YyB2Yeohvcw

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com/shopsmith-...

and http://shopsmith-tool-hunter.blogspot...

#TableSawGuard #BladeGuardMyths #StumpyNubs

download 1.jpg

Chad

Watch it here: https://www.youtube.com/watch?v=X5tVxb2h-GY

In this episode of "STUMPED? Q&A" we will tackle Questions, Comments, and Cheepshots from my last TWO videos: The Jigs & Fixture Hardware you've always needed: The "Bittner Nut" https://youtu.be/CBCHalabqGk and "Stumpy Nubs "Table Saw Blade Guard Myths BUSTED!" & How To Use Shopsmith Saw Guards. https://youtu.be/FBOzLpMLk_c

0:00 - Intro

0:43 - Welcome new Subscribers!

1:16 - Wrong way to assemble the Bittner Nut

2:00 - Watch out for partial threads!

2:37 - Bittner Knobs are ADJUSTABLE!

3:23 - Bittner Nuts are too small for some hands

4:02 - Weak vise option for making Bittner Nuts

4:35 - Harbor Freight Lock Nut Assortment

5:06 - Can we see some Jigs & Fixtures?

5:46 - Bolt and nut grades

7:08 - Budget T-Nut option?

7:36 - Magnets near the Shopsmith PowerPro headstock?

9:19 - Do I use a Shopsmith Accessory Shelf?

10:03 - Zero clearance table insert with upper saw guard

10:55 - Most watched Shopsmith video on Youtube! 621K views!

11:15 - Upgraded guards for early Mark Vs?

12:52 - Yes, I forgot to tighten the set screw

13:14 - Upper saw guard issues when table is tilted

14:18 - How long to convert Shopsmith between functions?

14:33 - Thanks for adding the "social" to social media!

A great chart with bolt grades:https://www.fastenermart.com/understa...

A similar chart with nut grades: https://www.fastenermart.com/files/nu...

Sub Jim Sevilla's Youtube channel: https://www.youtube.com/user/kd6vpe

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com/shopsmith-...

and http://shopsmith-tool-hunter.blogspot...

#Shopsmith #BittnerNut #SawGuard

Chad

Watch it here: https://www.youtube.com/watch?v=1uzgMJ7wHgw

Ripping lumber (sawing the length of a board) can be challenging enough as it is, but add gravity on the outfeed side of the saw to the mix and things can get dicey fast. This super-simple to build and easy to use shop-made accessory fence will earn a place in your shop the first time you use it.

This fence any many other jigs and fixtures you will see on this channel utilizes the inexpensive and easy-to-make "Bittner Nut ", which was covered in detail in a prior video: https://youtu.be/CBCHalabqGk

0:00 Intro
1:30 Shopsmith Mark V Model 510 vs 520 tables and fences
2:05 The accessory fence on a Mark V Model 510 fence with "Bittner Nuts"
3:33 The accessory fence on a Mark V Model 520 fence with "Bittner Bolts" and Shopsmith T-Nuts
5:12 A hint at what's coming next weekend

Shopsmith T-Nut part #555916 available from http://www.Shopsmith.com

Visit http://www.MyGrowthRings.com

Follow on Instagram @MyGrowthRings

I also blog at http://www.tool-hunter.com/shopsmith-...

and http://shopsmith-tool-hunter.blogspot...

If Amazon is more convenient for you than running to the hardware store,, here are some links for you:

Stainless Steel 1/4-20 nuts: https://amzn.to/2FoYeHm
1/2-13 Grade 2 nuts: https://amzn.to/35wFvEq
1/4-20 Nylon insert locknuts: https://amzn.to/3itjKZR
A reasonably priced assortment of nylon insert locknuts: https://amzn.to/3hsKXuu
If you'd rather just buy some 1/4-20 knurled knobs, check these out: https://amzn.to/2RmfrUa

#Shopsmith #TableSawExtension #JigsAndFixtures

« Previous Page