Schedule a Meeting · Talk to a real woodworker: +1 937-890-5197 · 8:00AM – 4:30PM ET

brackets

bill50cal

was on the new web site looking for the table brackets to put a floating table in front of the main table with no luck. are they still available? and if so what is the part number. an also mention the new web sit is still terrible to fine a specific item. a person should not have to scroll through 45+ pages looking for an item

DLB

They appear to be available, SKU 555997. This kit is for 510 and on. I agree with your comments, especially regarding any kind of accessory and I think the same could be said for upgrades.

David

chapmanruss

It is much easier to find items if you know the part number that David provided in this case. Below is a picture of the bracket set. You can search by name, but it can give more similar items than by part number.

In the description it says

The brackets work with all MARKs (except the MARK V 500) and

which is incorrect since they forgot about the 1960's Mark VII and the Mark 2 which also cannot use the brackets.

.
.

bill50cal

thanks. these are what i was looking for.

jsburger

FWIW, once you get them properly adjusted they are very easy to remove and install. There is a thread here (old forum) showing my uses. Don't know how to find it here yet.

HopefulSSer

jsburger
I concur. I have a set and they're extremely useful! I'm tempted to get a second set so that I can have both infeed and outfeed.

chapmanruss

HOPEFULSSER,

I have two sets and it is nice to be able to set up infeed and outfeed at the same time. It helps that I have both a Mark 7 and 520 with extra Floating Tables to use.

HopefulSSer

chapmanruss I've got a 520 and 510....

chapmanruss

HOPEFULSSER,

Having both 510 and 520 Floating Tables are you able to adjust the Brackets enough to use a mix of the two table types. Thinking 520 Main Table with 510 for the infeed and/or outfeed tables. It is something I haven't tried and am wondering if the adjustment Set Screw needs to be longer. Having 510 Tables also it's Just something I have thought about.

HopefulSSer

chapmanruss To use with a 510 vs a 520, you remove the screw and reinstall it from the other side