Shopsmith Forums

[quote="rpd"]This is the blade I have been using on mine. Freud D0840X Diablo 8-1/4-Inch 40 Tooth so an 8 1/4" blade will work. I just went out and measured, with the table set so the work just clears the belt guard there is 1 5/8" of blade exposed, enough to crosscut 2 x stock. ...

One more ?...Does anyone happen to know the thread size / depth on the quill lever? That is one thing that I don't remember seeing in all the stuff that I received. I would like to have a couple, one for front knob, and, and one for back knob. I realize that I can hop online and order a couple, but ...

If you didn't get an owners manual with your 10er you can download one from Vintage Machinery. 2016 MAGNA 10ER Restored Owners Guide v 1.01 - Everett L. Davis Also, thank you for the link to manual. I do have, I think, most of the manual, but have never really sat down to take a close look at it, t...

It should be three speeds. 875, 1750, 3500. I notice the belt is not straight in your pix. Your belt is 1/2" wide by 38" 'length'. Running skewed likely has caused wear to the sides of the belt. Both pulleys should have 2"/3"/4" diameters. The belt combinations are 2-4, 3-3...

It was originally an 8" saw. The belt cover was changed to provide greater clearance, but with that high SN I am guessing you already have the 'lower' one. Post a pix. As for the drive 'belts', do you have the speed changer(requires two belts). As requested, here are a couple pics. I did have ...

My 10-ER, which I have had for a number of years, S/N 66050 (passed down from grandfather), but not used much, is in need of a blade change. Current one that came with the machine is a tad warped. It is a 7-1/4". With the standard table insert, can the machine take a larger blade size, such as ...