Search found 243 matches

by badtheba
Wed Nov 18, 2020 1:00 am
Forum: Maintenance and Repair
Topic: Not Just a Coincidence
Replies: 27
Views: 1466

Re: Not Just a Coincidence

dusty wrote: Thu Oct 29, 2020 3:51 pmThe left face of the saw blade is about 1/62" to the left of table insert center line.
Where do you find the tape measure with those graduation marks?
by badtheba
Mon Oct 05, 2020 2:38 am
Forum: Maintenance and Repair
Topic: Last week's modifications
Replies: 2
Views: 474

Re: Last week's modifications

My third modification on the same machine used as a lathe was to fix the wedges per Skip's instructions to see if they would hold better. However, because it did no good to reshape the wedges on a machine I had with 2 piece wedges, I wanted to add something this time around that would prevent the on...
by badtheba
Mon Oct 05, 2020 2:08 am
Forum: Maintenance and Repair
Topic: Last week's modifications
Replies: 2
Views: 474

Re: Last week's modifications

My second modification on another machine I use as a lathe was to place the tailstock on the left side of the pivot base. I had been having trouble with extending the quill on this particular machine. When turning between centers, vibration and other factors seemed to always make the quill retract n...
by badtheba
Mon Oct 05, 2020 2:00 am
Forum: Maintenance and Repair
Topic: Last week's modifications
Replies: 2
Views: 474

Last week's modifications

I just went through a couple of my ERs trying to make them a bit more functional to how I was using them. First off I added a small brace at the back of the tie bar on my wall mount one. This let me eliminate the braided (3X 12 ga.) electrical wire I had wrapping the tubes and tie bar up before. I f...
by badtheba
Sun Sep 20, 2020 9:39 pm
Forum: Maintenance and Repair
Topic: Elusive motor pulley cover
Replies: 8
Views: 2201

Re: Elusive motor pulley cover

This has been officially produced by someone with a 3D printer on the 10E/ER Facebook group. Not mine. https://uploads.tapatalk-cdn.com/20200921/4c0aa7061d572916bda3c1bc862f360c.jpg https://uploads.tapatalk-cdn.com/20200921/8c3adb228929b76c6e28dd6246e1deeb.jpg https://uploads.tapatalk-cdn.com/202009...
by badtheba
Thu Sep 17, 2020 5:39 pm
Forum: Maintenance and Repair
Topic: Elusive motor pulley cover
Replies: 8
Views: 2201

Re: Elusive motor pulley cover

Russ, Are there many other actual photos of the part? I literally googled every combination I could think of and only found the photos of the brochures/catalogs from Magna and Wards, not an actual photo of the item. Even scrolling through pages and pages of google image results showed nothing. The m...
by badtheba
Tue Sep 15, 2020 9:57 pm
Forum: Maintenance and Repair
Topic: Elusive motor pulley cover
Replies: 8
Views: 2201

Re: Elusive motor pulley cover

I don't know if this will bring you there or not, it should if you are logged in and a group member. https://www.facebook.com/groups/Shopsmith10ER/permalink/611740503065685 Doug Smith sent me the file through messenger and said I could share it here, but I can't upload .stl files. He may add it to t...
by badtheba
Tue Sep 15, 2020 8:38 pm
Forum: Maintenance and Repair
Topic: Elusive motor pulley cover
Replies: 8
Views: 2201

Re: Elusive motor pulley cover

Here is the result of the 3D modeling effort based off the photos and measurements. This has now been made into a 3D printable file (can't be uploaded here directly). The creator has added some reinforcement because of the materials available for printing.
SS10ERcover.png
SS10ERcover.png (54.47 KiB) Viewed 2056 times
by badtheba
Tue Sep 08, 2020 10:03 pm
Forum: Maintenance and Repair
Topic: Elusive motor pulley cover
Replies: 8
Views: 2201

Elusive motor pulley cover

It's been a while since I posted here. Life is only getting more hectic with a job change in 2018, a 1 year old at home, and another on the way. However, I haven't let the SS passion die, and have a sweet spot for 10ERs since that was what I started with for my first restoration. I think I have 5 ER...
by badtheba
Sun Jul 07, 2019 9:35 pm
Forum: Community
Topic: Heads Up - Bargain 'available'
Replies: 1968
Views: 1992770

Re: RE: Re: Heads Up - Bargain 'available'

A 10E or 10ER for sale in AZ, but price is too high. https://phoenix.craigslist.org/cph/tls/d/laveen-shopsmith/6926390481.html Looks like a pretty early one with that quill return spring cover and the older quill stop collar. Not worth anywhere near that price though. Sent from my Moto Z3 Play usin...