Search found 11 matches
- Wed Apr 10, 2024 9:18 am
- Forum: Community
- Topic: Packing & Moving a Shopsmith
- Replies: 13
- Views: 2716
Re: Packing & Moving a Shopsmith
I am also looking to move now the Shopsmith. Will the moving company pack it for myself or better to pack it by myself? Any good or bad experience?
- Fri Jan 08, 2021 3:11 pm
- Forum: Community
- Topic: I am out of patience!
- Replies: 77
- Views: 37162
Re: I am out of patience!
I have been waiting since November 12th for an oscillating drum sander. This is why I always buy used form EBAY. I have been on hold for 45 minutes no one works at this company anymore. There is no way I would order a MArk 7 from them, I'd buy it second hand but this company has to be about finished...
- Wed May 13, 2020 7:14 pm
- Forum: Maintenance and Repair
- Topic: Idler drum on Belt sander loose
- Replies: 3
- Views: 5672
Re: Idler drum on Belt sander loose
The entire drum moves when no belt is on can slide forward and back. I believe this is normal. So what I did was try and clean the idler drum. It has old grease in it. I did not take it down to pulling the shaft out in fear I would damage the spring. I used some PB BLASTER brand White Lithium grease...
- Wed May 13, 2020 5:56 pm
- Forum: Maintenance and Repair
- Topic: Belt Sander Idler Drum
- Replies: 4
- Views: 6626
Re: Belt Sander Idler Drum
gentlemen, I have watched Nick's Video and I am confused what end of the spring do you want to remove the Roll Pin to get the shaft to come out? The end that the Tension knob connects to?
I believe my unit just needs a good cleaning probably never been done.
I believe my unit just needs a good cleaning probably never been done.
- Wed May 13, 2020 12:12 am
- Forum: Maintenance and Repair
- Topic: Thread locker on DC3300 Dust collector fan to motor bolt?
- Replies: 11
- Views: 42920
Re: Thread locker on DC3300 Dust collector fan to motor bolt?
I wanted to fill everyone in on the Thread type on the motor. It is standard thread righty tighty lefty loosey! I had to put new seals on the newly acquired DC3300. This time the motor bolt came right off no real problem. I am thinking the previous owner of the first one I acquired used red thread l...
- Tue May 12, 2020 11:59 pm
- Forum: Maintenance and Repair
- Topic: Idler drum on Belt sander loose
- Replies: 3
- Views: 5672
Idler drum on Belt sander loose
I purchased a used belt sander a year ago. I used it for several hours without issue with the belt it came with. I also purchased some non shopsmith belts and used a 120 grit for probably 2 hours. Now I have a problem. When i put a belt on and start the machine the tension knob pops and the belt los...
- Tue Feb 04, 2020 10:20 pm
- Forum: Community
- Topic: Tenon Master Jig Manual
- Replies: 2
- Views: 6365
Re: Tenon Master Jig Manual
Much appreciated! Great site.
- Mon Feb 03, 2020 10:39 pm
- Forum: Community
- Topic: Tenon Master Jig Manual
- Replies: 2
- Views: 6365
Tenon Master Jig Manual
Does anyone have a copy of the Tenon Master Jig Instructions?
- Wed Jun 26, 2019 10:38 pm
- Forum: Maintenance and Repair
- Topic: Thread locker on DC3300 Dust collector fan to motor bolt?
- Replies: 11
- Views: 42920
Re: Thread locker on DC3300 Dust collector fan to motor bolt?
br549, I did indeed buy that dust collector as it was a good deal. Not sure if I will mess with the old one.The the first one seems and the new one both want to accumulate saw dust in the motor. That is why I took off the fan for those wondering. However, this one came with 2 dust hoods which was a ...
- Tue May 07, 2019 6:17 pm
- Forum: Maintenance and Repair
- Topic: Thread locker on DC3300 Dust collector fan to motor bolt?
- Replies: 11
- Views: 42920
Re: Thread locker on DC3300 Dust collector fan to motor bolt?
The dust collector seals had worn so I decided to clean it out good. I was just loosening the bolt and it managed to shear off.....rather disappointed that it did. Basically it looks like the dust collect is junk now. Looking for a motor for it.....was disappointed the motor said made in Mexico...so...