Shopsmith Forums

I cannot get the tube guides on the main and extension table to align. They are way out of "adjustment" that the adjustment of the posts on the aux table allow for. This is on a 500 upgraded to a 520. I have tried rotating the aux table 180 and still no alignment. This is one where a pict...

Your Mark was manufactured as a Mark 5/V. When SS introduced the Model 510 they started calling everything before that a Model 500, so that is what yours is. We sometimes use "pre-500" and other terms to differentiate among the 500's. Looking at the carriage in your second picture, yours h...

So I tried installing the new part and this ring is giving me trouble. Am I supposed to install the drive onto the shaft with the ring already seated in the drive? Or do I put the ring on the shaft first, then put the drive on? If I do the first, the drive doesn't fit on the shaft. If I do the seco...

Free play that is in and out, with the quill spindle moving in and out while the quill housing is stationary, is axial free play. Your hand positions in the picture make me think this is what you may be referring to. In my limited experience this was caused by the outer quill bearing both times. Ano...

The shims are placed against the SIDES of the tubes. The tube clamp exerts outward pressure to the tubes. The final position is determined by a small boss extending out from the outer interior surface of the end casting. The shims essentially make that boss longer. The shims are necessary since his...

An idea that SS already has.... https://shopsmith.com/product/rip-fence-extension-package-for-mark-7-mark-v-520-mark-4/ Problem was price for me. :rolleyes: IF SS would make it an option to compete price wise...it would make sense. All of my many SS toys would fit/work. Doc Currently on sale and av...

I just attempted to upgrade my Mark V, serial number 329420. The bench tubes are too large to fit. If i order new tubes does that require a new motor and bench table? Or can these items fit the smaller diameter bench tubes. If your DT upgrade is complete it will also contain new double rack main ta...

Today, I think I learned that there are at least two versions of the Drive and Ring. I might have them mixed up, but I think this one has been in my parts drawer for 40 years since I mistakenly bought it for my Greenie, and I think it is the same as one I received recently. Externally, it has some d...

That's excellent. I use fence extenders for large workpieces and agree with his comments on added control. My extenders are a pair of 510 fence extrusions mounted to the face of my 520 fence with countersunk screws and SS T-Nuts. The 5" height of the Bow Xtender isn't for me, it would not be co...

...I have a router table that I mount ion a cutout on one of my workbench. I store it away, and have a rectangular piece of plywood that matches its size. That way, I have a router table or a workbench. I doubt you'll use the Mark as an under table router then. The system does provide overhead, hor...