Thank you! The model is here for download
https://www.printables.com/model/304846 ... using-clip
Search found 75 matches
- Mon Oct 31, 2022 10:40 am
- Forum: Maintenance and Repair
- Topic: Mark VII blower clip 3D print
- Replies: 2
- Views: 710
- Sun Oct 30, 2022 8:18 am
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
Re: Mark VII Cam follower sheave
Ok rookie question: how would I mount the drill chuck on the end stock? Do I need a specific adapter for it?
- Fri Oct 28, 2022 4:29 pm
- Forum: Maintenance and Repair
- Topic: Mark VII blower clip 3D print
- Replies: 2
- Views: 710
Mark VII blower clip 3D print
I made this cuz I was missing these clips. Let me know if you're interested.
- Fri Oct 28, 2022 5:19 am
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
Re: Mark VII Cam follower sheave
Best way to drill/tap the hole is to remove the shaft from the cam. Now is where two drill chucks comes in handy. Put the shaft in a drill chuck mounted to the quill shaft. Mount a second chuck to the tailstock. Use small pilot drill first then drill out to tap drill size. Drill will be stationary ...
- Wed Oct 26, 2022 6:36 am
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
Re: Mark VII Cam follower sheave
A couple of ideas: I drilled and tapped the speed control shaft for an 8-32 screw; removed the snap ring and installed a screw to pull the shaft and speed control knob tighter to the detent balls (see pic). It works great. If your detent grooves are completely worn out I would get some glass-filled...
- Tue Oct 25, 2022 10:37 am
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
Re: Mark VII Cam follower sheave
It is, so all good. From the other thread about runaway speed, I thought I had to do it the other way around. I'm suffering from the runaway speed issue...beyond 1000rpm, she self throttles to 4600rpm and it's because the grooves that hit those détentes have totally worn out. I am at a crossroads of...
- Tue Oct 25, 2022 6:39 am
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
- Mon Oct 24, 2022 6:14 pm
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
- Mon Oct 24, 2022 3:27 am
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
Re: Mark VII Cam follower sheave
Thank you sir!
- Sun Oct 23, 2022 7:58 pm
- Forum: Maintenance and Repair
- Topic: Mark VII Cam follower sheave
- Replies: 21
- Views: 3495
Re: Mark VII Cam follower sheave
I measured 1/2" long and 0.11" diameter so probably around 7/64" ?