Shopsmith Forums

Got it
Thanks

Sorry I posted this on your other post first before seeing that you reposted here. I removed it in the other location. Your Mark V was made in July of 1981. Your Bandsaw was made in August of 1983. There have been a few changes since the Bandsaw was introduced in 1955. That being said even those ea...

I need a table extension for miter distance as shown in pic for my greenie
What part # is it ?

I found an image on the internet that displays the "rubber sleeve" on the bearing.
It is the 3rd image at this site;
http://lumberjocks.com/reviews/328

PS: I have a nice pic but I cannot meet the BBCode standards for posting it.

I apologize if I am redundant in starting this thread but I made a good faith effort to review prior posts. Since I do not have a product manual for my circa 1956 bandsaw I will use the current bandsaw parts manual as a guide to indicate description and reference number. My question concerns ref no ...

There should not be any difference in which direction you rotate the quill. Check if the Gilmer belt is trying to ride up on the Drive Sleeve Gilmer clutch pulley hub. The Gilmer belt will come closer to or try to get up on the hub when rotated backward. Look closely as you rotate the quill to see ...

This is my first post so forgive me for posting as a new thread, but when I initially(yesterday)posted it on an older thread I didn't get any replies(ah, yee of little patience !). I have an A-headstock greenie from my dad. Recently it started tripping the breaker, and after cruising this forum and ...

I have an A-headstock greenie from my dad. I use it infrequently but when it kept tripping the breaker, and after cruising this forum, I decided I needed to lubricate. The motor and belts were replaced about 10 years ago. In drill press position. Motor dropped. Control sheave removed(and drive belt)...

I have an A-headstock greenie from my dad. I use it infrequently but when it kept tripping the breaker, and after cruising this forum, I decided I needed to lubricate. The motor and belts were replaced about 10 years ago. In drill press position. Motor dropped. Control sheave removed(and drive belt)...