Shopsmith Forums

This thread helped me modify my DC6000 so I wanted to share pictures of what I did in hopes it will help others. I did not do any pre or post measurements but qualitatively much better-Jim This is great. I major step toward "good" dust collection. Also - the dust collection bag. JET part ...

My opinion and the way I would fix it is, I would smooth the area so no one can get a splinter for now. Then I would get a piece of similar wood same grain direction and whittle it to fit into the area. Take your time and do a really good job. Once you got it to fit I would glue it in place sprinkl...

What is the best method to repair this hand rail without replacing or removing?

This thread helped me modify my DC6000 so I wanted to share pictures of what I did in hopes it will help others.
I did not do any pre or post measurements but qualitatively much better-Jim

Another pic

This is what I ended up doing.

Prudent advice would be to use the upper saw guard at all times possible. My upper saw guard has been stored in the shop equipment cabinet for years. I have a riving knife installed on the table saw and hardly ever remove it. Yes, it serves the purpose of a riving knife for all cuts even though the...

Hi, Sorry to revive this thread on riving knife. I have been using my shopsmith Mark 7 when ripping with my Grr-ripper pushblocks.( I use two) Of course I have to take off the upper guard and riving knife. I have been looking at getting the Non-Through-Cut Riving Knife. I know it says for "Non ...

[/img]First want to thank everyone for comments, insights and suggestions. After careful thought I decided to mount the Phenolic router table (3/4 in thickness) on top of the SS work table and an extension table. I adjust the spacing between the worktable and extension table so the it provided supp...