Shopsmith Forums

I brought the snappy 5 piece brand. first thing I notice was the larger allen screw. I am sure I'll like them.
thanks all

thanks all

no I have have round drill bit

I am so tired of my counter sink bits not tighten up enough to stay on the drill bit.

those little allen screws just get stripped out when you try to crank them tight.

anybody have good counter sinks that they like.

not looking for the $100 types.
thanks in advance

thanks
I tried wiggling the power cord, but didn't repeat, so I guess it might be the Wire connection between the control board and motor is loose. moving it might have wiggled that cord.

I brought a power pro used, so I don't have a manual twice I got this error SRM not rotates It happened when I move the SS while running. is this what it means, you can't move it while running. just so I don't get a bunch of feedback about safety. I was just sliding it over closer to the light. than...

functionality lost--- I put a 500 table on it (which is smaller than others) and it was a tad short for a disk sander on the quill. If I ran the disk up the slot, no problem. I had the tubes and the time to make it a little longer, so I did.

Glad to see you are still around Dusty

I have some SS tubes that are available. They have been cut down to 14 inches and 34 inches. four of each size. the 14s are good if you are making a dedicated drill press. I used about 10 inches. the 34s are good for a mini, they are 2 inches short for a nice shorty (don't ask how I know). anyway, i...

so I got my powerpro today. really nice. looks like it was made in 2010..that date appears on boot up. Came with a band saw with a cast table. I already have two band saws, keep a 1/2 inch blade on one and a 1/4 inch on the other. one is mounted on a shorty the other on my new pp. the band saw that ...

I appreciate all the feedback. I never unplug anything,( did say that) I was referring stopping the electrically the the control panel, which if it's consistence on with some jet electronic lathe, burns the electronic out. That was my main concern. It seems like the on/off switch would take care of ...