Search found 1911 matches
- Thu Apr 11, 2024 3:34 pm
- Forum: General Woodworking
- Topic: Which Lathe upgrade?
- Replies: 16
- Views: 2876
Re: Which Lathe upgrade?
It's not limited to just turning but can be used with larger Drill Bits, think Forsner, which slows them down to avoid burning. The Conventional Mark V Headstock runs between 700 and 5200 RPMs. Scott Markwood from My Growth Rings pointed out that the speed reducer doesn't work great for drilling be...
- Thu Apr 11, 2024 2:58 pm
- Forum: Maintenance and Repair
- Topic: How do you really feel about the term "Smart Motor"?
- Replies: 11
- Views: 1253
Re: How do you really feel about the term "Smart Motor"?
I'm not thrilled with the term, but as I already said in another thread I don't see anything wrong with calling it a 'headstock'. As others have said also, 'Smart Motor' is not a real good name for a conventional headstock at all. There's nothing all that smart about it.
- Thu Apr 11, 2024 11:50 am
- Forum: Community
- Topic: Packing & Moving a Shopsmith
- Replies: 13
- Views: 3594
Re: Packing & Moving a Shopsmith
Many movers will have experience with packing large tools. Even if you have movers do it i'd suggest removing the headstock and packing it separately, either by yourself or the movers. I doubt the movers would know how to do that themselves. Certainly you'd want to remove the tables to pack separate...
- Wed Apr 10, 2024 2:21 pm
- Forum: Community
- Topic: Packing & Moving a Shopsmith
- Replies: 13
- Views: 3594
Re: Packing & Moving a Shopsmith
I'd take the headstock off completely and pack that separately. You could leave the tubes and end castings assembled and strap them onto a heavy board, but you'll save a lot of space if you dissemble those pieces.
- Wed Apr 10, 2024 12:05 pm
- Forum: Maintenance and Repair
- Topic: Is the Smart Motor Speed Dial Ring, Back-Up Spring, part# 504196
- Replies: 17
- Views: 1671
Re: Is the Smart Motor Speed Dial Ring, Back-Up Spring, part# 504196
I'd argue you'd still call it a headstock regardless of what you're doing. It's not called a headstock on other drill presses, but other drill presses aren't lathes stood on end. At its core, a Shopsmith is a lathe with a bunch of accessories that turn it into other things. So for that reason.........
- Tue Apr 09, 2024 7:16 pm
- Forum: Maintenance and Repair
- Topic: Is the Smart Motor Speed Dial Ring, Back-Up Spring, part# 504196
- Replies: 17
- Views: 1671
Re: Is the Smart Motor Speed Dial Ring, Back-Up Spring, part# 504196
It's still a headstock. At least in lathe mode it is. I've never heard of the power head on a drill press or other tools referred to as a headstock that I can recall. I don't see the problem calling it either a 'Smart Motor' or a 'headstock' in the right context.
- Sun Apr 07, 2024 11:49 am
- Forum: General Woodworking
- Topic: Table Saw Cutting Funny
- Replies: 25
- Views: 3373
Re: Table Saw Cutting Funny
I guess you could try cutting a piece of plywood to see if it's the saw and not the wood.
- Thu Apr 04, 2024 4:58 pm
- Forum: Maintenance and Repair
- Topic: New Owner
- Replies: 21
- Views: 2392
Re: New Owner
Are there any specific tools I will want to bring on Saturday? I've seen reference to a long handled Allan wrench. I'm assuming all bolts and connectors are imperial measurements? The only tools you should need are pliers and a screwdriver to remove the legs. 5 screws hold each leg to the base cast...
- Wed Apr 03, 2024 10:04 am
- Forum: Maintenance and Repair
- Topic: Control sheave loop repair
- Replies: 3
- Views: 543
Re: Control sheave loop repair
Cool solution. Ball point pen tubes have a lot of uses, some I don't want to mention here or admit knowing about, but this is a good one.
- Tue Apr 02, 2024 9:24 pm
- Forum: Maintenance and Repair
- Topic: New Owner
- Replies: 21
- Views: 2392
Re: New Owner
Is there a fence? I see chuck keys but no chuck. Did you get saw guards?