Search found 21371 matches
- Fri Dec 08, 2006 1:47 pm
- Forum: Beginning Woodworking
- Topic: Need some help
- Replies: 20
- Views: 65681
Need Some Help
I'm going to pass on this one. You don't want to use my method until all else fails. I would use shock therapy; the shock provided by a rubber mallet. I suspect that your problem is saw dust that has compacted in the location where the seized wedge is seated (along with the wedge). Study the illustr...
- Fri Dec 08, 2006 8:28 am
- Forum: Woodworking Tool Review
- Topic: 510 to 520 upgrade
- Replies: 25
- Views: 115227
510 to 520 Upgrade
batg4 I am curious. In a post earlier in this thread,. you indicated that you were about to realign your tables. How did that go. I am certain that they will align to your satisfaction. Have you decided to upgrade to the 520. When you do, I know you'll be impressed with the new characteristics and c...
- Thu Dec 07, 2006 8:38 pm
- Forum: Beginning Woodworking
- Topic: Need some help
- Replies: 20
- Views: 65681
Need Some Help
hagarz71 You said the headstock is hard to move on the tubes and that you had the headstock off to clean and wax; I assume you mean off of the way tubes . The possibility of wax buildup and bent tubes having already been covered (my first suspicions as well), we need to find something else. When you...
- Thu Dec 07, 2006 6:02 am
- Forum: General Woodworking
- Topic: Jointer, Planer, and Belt Sander Instructions?
- Replies: 15
- Views: 10175
Jointer, Planer and Belt Sander
Thanks reible
Now I understand. I have my owners manuals but some of the part numbers didn't seem to match this list.
I'll try again. I am attempting to learn all I can about the 'powerhead'. I'm trying to compile data from as many sources as I find.
Now I understand. I have my owners manuals but some of the part numbers didn't seem to match this list.
I'll try again. I am attempting to learn all I can about the 'powerhead'. I'm trying to compile data from as many sources as I find.
- Wed Dec 06, 2006 2:29 pm
- Forum: Beginning Woodworking
- Topic: Biscuit Jointer question
- Replies: 3
- Views: 17149
Biscuit Jointer
Be careful!!!
I agree that Loctite 222 is a viable solution BUT make certain of the type of Loctite you get; some types are is near "permanent".
I agree that Loctite 222 is a viable solution BUT make certain of the type of Loctite you get; some types are is near "permanent".
- Wed Dec 06, 2006 7:36 am
- Forum: General Woodworking
- Topic: Jointer, Planer, and Belt Sander Instructions?
- Replies: 15
- Views: 10175
Jointer, Planer, and Belt Sander
Thanks for the detailed list. This is certain to be very useful. However, I have a question about the information provided. What are the Part Numbers shown here; how can we use them? Example: 845036 Jointer Manual (what is Jointer Manual, 505681-B) 845231 Belt Sander Manual (what is 6" Belt San...
- Tue Dec 05, 2006 6:09 pm
- Forum: General Woodworking
- Topic: Main table ribbing
- Replies: 18
- Views: 64656
Main Table Ribbing
The Alignment Tool is probably a very good idea and being as I am about tools I will probably acquire one if it is anything more than a set of feeler gauges. But, my question was really "Why are permanent spacers (.005 or more) NOT used to provide a means of permanent clearance between the cros...
- Tue Dec 05, 2006 6:44 am
- Forum: General Woodworking
- Topic: Biscuit joiner
- Replies: 47
- Views: 16173
Biscuit Jointer
I'm still using a desk and bookcase that I built in an early 50's woodshop class and it was put together butt joints and hot glue but I don't want to go back to that. I use biscuits and a Ryobi biscuit jointer that I've had for a long time. Incidently, I used some brads the other day and they show t...
- Sun Dec 03, 2006 4:48 pm
- Forum: General Woodworking
- Topic: Any way to convert 1/4 router to 1/2 router?
- Replies: 16
- Views: 54783
Convert 1/4 router to 1/2
sawdustman
Offload your excess routers to reible who says one can ever have too many routers and then you can go buy your own 1/2 router.
Offload your excess routers to reible who says one can ever have too many routers and then you can go buy your own 1/2 router.
- Sun Dec 03, 2006 9:04 am
- Forum: Beginning Woodworking
- Topic: Maitainance Question
- Replies: 15
- Views: 28274
Maintenance Question
I had that exact same question just a few months ago. I am not an expert just recently experienced with the same challenge. I too asked for guidance from the Users Group. Here is what I concluded from the advice given. Dig out the operators manual and read it, read the maintenance section very well....