Shopsmith Forums

Geese you guys ought to be here in KY! Today got up to 67 and Sunday's low is predicted to be 7 !!!!!!

Real pneumonia weather.

Merry Christmas ALL!

Tim's link shows 3 different model #. They are all 3 identical EXCEPT for the table/fence system. I don't think the "model #" appears on them, it is used for ordering purposes.

The radius if the cutter edge affects cutting speed. A larger radius results in a faster "cutting" speed for a given rpm. The faster the cutting speed, the more likely a smooth cut will result as well as being quicker. Cutting speed can be altered by changing rpm's OR radius. Think of a la...

See What 3 Hours Earlier Does For Clarity!!!!!

Clues: Red Safety Switch Or Plain Toggle Switch? = Post 1991 / Pre 1991 Made By Shopsmith Inc Or Magna Engineering = Post 1972 / Pre 1967 Green/silver Paint = Pre 1960 Brown/gold Paint = 1960 - 1963 Grey/smooth Paint = 1963 - 1967 (1972 - 1984)??? Grey/textured Paint (sn 190000 Up) = 1984 - 1987 Uni...

Pn 503574 Is The Coupler Only. Mk V & Accessory "must" Have Hubs To Use. Pn 555124 Is A "kit" Containing A{coupler}; B{hub For Mk V}; And, C{hub For Accessory(spt)}. These Parts Are Interchangable With Similar Parts Of Previous Designs. Some Are Open On Both Ends, Some One En...

Mr Wolf: You are right! I am SORRY! Will try to be less critical from now on!

We should be encouraging "neophytes".

Did not mean to "chastise" a previous postee. Apparently it sounded that way. My intent was more to support SS and encourage others to do the same.

Old timey soap boxes were dove-tailed!!!:D

Hello!! The part that is not working is the "CHUTE". I do NOT have a problem with chips squirting out from under the infeed table. I do NOT have a chute at all. Think about the task at hand. The cutter head slices off a small piece wood of and forces it towards the infeed table! The chute ...

Hey!!! Send it in! Let us all know what (if any) response you get!!!:D :rolleyes: