Search found 225 matches
- Sun Oct 29, 2023 6:03 pm
- Forum: General Woodworking
- Topic: Long 45 cut on large piece conundrum
- Replies: 16
- Views: 18924
Re: Long 45 cut on large piece conundrum
This might be overkill if this is a one time project, but it's an excuse to buy another tool. Pick up a 10" radial arm saw from Craigslist. You can set up tables or roller stands around it as necessary and it should be able to rip to the middle of a door up to 48". Around here, there are l...
- Sun Oct 01, 2023 8:17 pm
- Forum: Community
- Topic: SPAM REPORTS
- Replies: 3
- Views: 2031
Re: SPAM REPORTS
I check in nearly every day and rarely see anything objectionable so you are clearly on top of it. Thank you for performing this thankless job.
- Thu Sep 28, 2023 9:21 am
- Forum: Community
- Topic: Oops, I did it again!
- Replies: 4
- Views: 1018
Oops, I did it again!
3 hours after it was posted on Craigslist, it was in my trailer for $200. This is my first ER and it looks like the serial number is 40938, but I'm going off a photo because it is still in the trailer. This is SS #3 for me. 00d0d_bQ6J2TM0KOQ_0CI0t2_1200x900.jpeg 00L0L_fY8H3bTqTRe_0CI0yY_1200x900.jpe...
- Sun Sep 10, 2023 9:55 am
- Forum: Community
- Topic: Forum working?
- Replies: 4
- Views: 1425
Re: Forum working?
I've been doing too much work they have to pay me for to do any work I enjoy.
- Fri Sep 01, 2023 8:09 am
- Forum: Maintenance and Repair
- Topic: Operates Shopsmith on a GFCI circuit?
- Replies: 6
- Views: 1244
Re: Operates Shopsmith on a GFCI circuit?
It is a Jet JCDC3 3 HP. It requires a 20 amp circuit but I didn't want to be limited if I ever need to replace it. In my 1000 square foot shop, it is plenty along with 3 HEPA vacs for bench top tools.
- Thu Aug 31, 2023 5:28 pm
- Forum: Maintenance and Repair
- Topic: Operates Shopsmith on a GFCI circuit?
- Replies: 6
- Views: 1244
Re: Operates Shopsmith on a GFCI circuit?
I finished my basement where my shop is in 2021 and while it wasn't code yet, the inspector strongly recommended I use GFCI/AFCI breakers for all the basement outlets. I've never had an issue tripping on either of my 520's. All the 120v outlets in the shop are 20 amp. My dust collector is 220v 30 am...
- Tue Aug 22, 2023 5:12 pm
- Forum: Community
- Topic: Woodworkings Most Dangerous Tool T-shirt
- Replies: 7
- Views: 3199
Re: Woodworkings Most Dangerous Tool T-shirt
My wife told me just last night I needed new t-shirts. Ordered mine.
- Sun Aug 13, 2023 7:48 pm
- Forum: General Woodworking
- Topic: My best woodworking project yet
- Replies: 20
- Views: 13479
Re: My best woodworking project yet
That is absolutely fabulous!. The finish shows amazing depth. I'm a Scotch guy myself, but who could pass on anything presented so beautifully.
- Thu Aug 03, 2023 8:11 pm
- Forum: Community
- Topic: IVAC Switch Box on MarkV Model 510
- Replies: 2
- Views: 668
Re: IVAC Switch Box on MarkV Model 510
I have used it. The one I had used two different power cords to run from two separate circuits. I ran 2 20amp cicuits to it and used it with my 510 and a Ridgid vac for a number of years with no issues.
- Sun Jul 30, 2023 9:44 am
- Forum: Woodworking Tool Review
- Topic: Incra 5000 Sled
- Replies: 12
- Views: 14540
Re: Incra 5000 Sled
Algale, I don’t even know if you’re still active on this forum, but I hope you’re still actively making sawdust. Just wanted to let you know that this post and these photos, even years later, really helped me out today. I bought a new Incra 5000 for my Mark VII, but they don’t sell the SS variety a...