Shopsmith Forums

Sorry Ed- that was a typo ! More like 4mm.

Here is the stuff I cut up and use on my bar clamps to avoid denting my projects.

https://www.amazon.com/gp/product/B01MT ... UTF8&psc=1

b

double stick tape and some 14mm leather!

Alright-I'm getting a bit better at this now..burning thru the poplar though !
I think they are good enough to gift some now.


Also - a couple encounters on my daily constitutional...
b

Dont worry-they'll be coming back again

Have your contract written and ready heh.

b

My subaru does that...i just need to mount my circular saw below the front bumper !

Alright - attempt #2 . I dug around and found a 1/4 router bit that needed sharpening but should provide thre 1/3, 1/3, 1/3 dimensions Ed mentioned above. I did the tenons this morning - with a 3/4 depth. 1/4 spacing all around. m+t v2.jpg m+t v22.jpg Is this the standard dimension ...now that i mad...

Thanks JPG - I will see if I can manage that on the next round .

Any recommendations on length ?

b

Yes- i have 1 good bit for the router currently

Is there a "standard" size for these things?

I did the tapers on the bandsaw once I had cut down the legs to 2x36 rectangles on the saw (for the tall one). The mortise and tenon/slot work - I first thought to do on the router table, but opted to nibble them away on the saw once I gave that a try and saw it worked nicely. I have a couple pieces...

I started this about a week ago as I wanted to attempt a mortise+tenon joint. I hadn't worked on that before. The first tenon attempt came out offset on the board face..haha-took some creative alignment on the mortise side later..but it worked for the most part. offset-mortise.jpg Here are the legs/...