Shopsmith Forums

jsburger wrote: ↑Fri Oct 20, 2023 11:51 am The 500 to 510 or 520 upgrade kit from SS contains the longer hub to upgrade the sanding disk. So yes it can be done.

Another thing I did not get when I bought my used upgrade.

Can the sanding disk that came with the 500 be upgraded to the hubs that come with the 520?

I have two dedicated drill presses. My first one was purchased for drilling steel. I don't use my Shopsmith for drilling metal. The second one was purchased, used, refurbished, and set up to drill tiny holes for scroll saw projects. My Shopsmith is used for horizontal drilling in wood only. I don't ...

A magazine's reason for existing is to sell advertising.

edma194 wrote: ↑Sat Apr 29, 2023 2:52 pm

cooch366 wrote: ↑Sat Apr 29, 2023 2:31 pm
Do you have a link to this. I’m close to the edge of the earth.

Sorry about that. Added the link to the original post, and here it is again:

https://mail.google.com/mail/u/0/?tab=r ... hBLlxlSqbd

This is a link to your email.

In a wet-dry vacuum, the air sucked in is not used to cool the motor. The motor is cooled by a separate fan attached to the opposite end of the motor.

I learned the hard way not to stock up on sanding belts. The adhesive will eventually separate, no matter where you store them. Granted, storing them in a climate-controlled area will prolong the life of the adhesive. I try not to have more sanding belts on hand than I think I will use relatively qu...

I make small items that have pieces as thin as 1/8-inch. I have boxes full of short hardwood cutoffs with all sorts of thicknesses. A box where I want all the sides to be the same thickness comes to mind. I would resaw it to get the required thickness and sand it flat. To do this with a conical san...

I don't have a drum sander and do not intend to buy a Shopsmith drum sander due primarily to its not being a standard size. This discussion sent me down a rabbit hole researching drum sanders. It seems to me that the sleeveless drum sander is the way to go. I have lots of sandpaper I could use on a ...

What size stock are you trying to arrive at? And starting from what size? If you have large enough stock to resaw it why would you want to sand it down to size instead of just finishing it? I make small items that have pieces as thin as 1/8-inch. I have boxes full of short hardwood cutoffs with all...