Shopsmith Forums

Why don't you use the switch that was in the '84. A SPST switch will suffice but sometimes Shopsmith used a DPST swiitch to break both sides of the power. Use a 20 amp rated switch because of the startup current and rated at 2 horsepower. Should be able to be obtained at Lowes or a well stocked hard...

Does anyone know if there is a canister style filter on the market that will fit the DC3300 dust collector?
Bill V

Had a few of these handles available so I made a long handled garden spade. Bill V

A few other things come to mind to me 1. Make sure that the table is perpendicular to the saw blade. 2. Use an auxiliary fence to support the stock. 3. The side of the stock that rides the fence should flat against the fence to prevent wobble 4.the edge against the table should be 90 deg to the face...

I painted the whole thing red and then sanded the letters by putting the badge on a piece of sandpaper to take the paint off the letters. Progress through 400 or 600 grit and it looked OK
Bill V

The tool plus one battery. OK. How do you charge the battery without a charger?
Bill V

Check the license plates. One of them can be checked on the FCC website or the ARRL website
Bill V

I store mine this way.
Bill V

Dusty has a good point, that nut is righty tighty and lefty loosie.
Bill V

Can you get the arbor off the quill shaft? It looks in your photo that the set screws are not lined up, they should be. If you can get it off the quill then proceed as edma suggested and it should come apart.
Bil V