Search found 1104 matches

by benush26
Sat Aug 04, 2012 8:14 pm
Forum: Maintenance and Repair
Topic: 5/8 arbor old style vs new
Replies: 15
Views: 2836

5/8 arbor old style vs new

Were any old style 5/8" arbors made to belong enough to be used on the 510? I have two nice blades (a 60 tooth carbide and an 80 tooth freud dual side laminate cutter) that are 5/8 and would like to have an arbor that fits them AND the 510. :D Being old, too excitable and foolish I bought a 5/8...
by benush26
Sun Jul 22, 2012 12:20 pm
Forum: Maintenance and Repair
Topic: Jointer Retro-fit alignent pin question
Replies: 5
Views: 1846

Ben I believe that SS changed to the 1/4 X 20 screw size because so few people had the 28 thread tap. When I made the upgrade to my son's machine I broke the original stop bolt and used a 1/4 X 28 bolt as a replacement by grinding the head off. I see no problem with going with the 20 thread except ...
by benush26
Sun Jul 22, 2012 12:04 pm
Forum: Maintenance and Repair
Topic: Jointer Retro-fit alignent pin question
Replies: 5
Views: 1846

[quote="SDSSmith"]Welcome to the forum, Ben. Do you mean the stop pin (item 60E in the following diagram)? If so, you should be okay as long as the top of the pin is the same height from the table. If not, which pin are you asking about?

Yes, 60E is the correct part.

Thanks for the reply.
by benush26
Sun Jul 22, 2012 12:00 am
Forum: Maintenance and Repair
Topic: Jointer Retro-fit alignent pin question
Replies: 5
Views: 1846

Jointer Retro-fit alignent pin question

Greetings, New to this forum but bought a new 500 30 plus years ago and then sold it a couple years later (after a divorce and needing money), but now I'm retired and back in the fold. I was lucky enough to get a good jointer cheap and it came with the Feather Retrofit (but not installed). The align...