Page 1 of 1

Are these Shopsmith accessories?

Posted: Mon Jan 14, 2019 2:53 pm
by donpol
I have a few items that came with a 10er I bought. I can't find them in any of the paperwork I have. I'm hoping someone can tell me if they are Shopsmith accessories or some other brand.

Re: Are these Shopsmith accessories?

Posted: Mon Jan 14, 2019 3:07 pm
by jsburger
donpol wrote:I have a few items that came with a 10er I bought. I can't find them in any of the paperwork I have. I'm hoping someone can tell me if they are Shopsmith accessories or some other brand.
The lamp is not Shopsmith. You can see a SS lamp in the attached picture.

The second picture I believe is a clamp from the Magna set of stock hold downs. Someone will correct me if I am wrong. :)

The third picture is the flexible coupler used to connect the A-34 jig saw to the 10ER spindle.

Re: Are these Shopsmith accessories?

Posted: Mon Jan 14, 2019 7:42 pm
by chapmanruss
John is totally correct on the first two. The clamp is shown below.
Universal Hold Down
Universal Hold Down
IMG_0645cb.jpg (278.19 KiB) Viewed 8388 times
The Third item is not a Shopsmith/Magna part but if it is the correct size is a substitute for the coupler to connect the Jig Saw to the Model 10's spindle.

Re: Are these Shopsmith accessories?

Posted: Tue Jan 15, 2019 1:00 pm
by jsburger
chapmanruss wrote:John is totally correct on the first two. The clamp is shown below.
IMG_0645cb.jpg

The Third item is not a Shopsmith/Magna part but if it is the correct size is a substitute for the coupler to connect the Jig Saw to the Model 10's spindle.

That is what I thought but forgot to mention it. Lovejoy makes couplers today that will work.

Re: Are these Shopsmith accessories?

Posted: Wed Jan 16, 2019 11:29 am
by chapmanruss
donpol,

I should have been clearer before. From the other pictures I see one end has a sleeve in it. To work as a replacement for the coupler for the Jig Saw on a Model 10 it needs to have a 5/8" bore on both ends. The original coupler is 1-7/8" long and 1-3/16" diameter. Sorry I did not give you these dimensions before. If a replacement is too long, to large in diameter or has the wrong size bore it will not work.

Re: Are these Shopsmith accessories?

Posted: Wed Jan 16, 2019 12:45 pm
by BobCoates1953
The Lovejoy coupling works. I got one "just in case" the original fails for my son.
Info from sale receipt:
2 required: L070x .625 1024 These have a keyway but not really needed.
Bore 5/8 hub od 1.36 max rpm 3600.
1 required: L070 10406 spider solid center

Since there are 3 pieces I put clear duck tape around them (so son won't loose them :) ).
Test fitted and ran, didn't see any problems
Cost was less then 20.

Bob

Re: Are these Shopsmith accessories?

Posted: Wed Jan 16, 2019 1:21 pm
by chapmanruss
Bob,
He was just trying to identify the parts and not looking for other options. I posted the clarification based on the pictures in his eBay ad.