Issue:
I :removed the quill from my Mark V headstock. I have tried to get it back in all the way. It stops, but not fully in. I get the splines in then it stops about 1” from complete retraction. I know I have a broken spring and yes you can hear the spring twang a few times when putting the quill back in. I have removed the quill before and it went right back in. What has happened?
Quill stuck out.
Moderators: HopefulSSer, admin
-
Thomschuck
- Gold Member
- Posts: 68
- Joined: Mon Sep 24, 2018 8:12 pm
Quill stuck out.
Thom Schuck
SS Model 5 500 Completely Restored
SS Bandsaw Completely Restored
SS Jointer Completly Restored
SS Biscuit Cutter
Rikon Low Speed Grinder W/Wolverine jig
Kreg Tool TrackHorse X 2 + Kreg Tool Project Center with 35 Kreg Tool Clamps
11 Systematic Blades of every configuration
Bosch/Mikita handheld power tools plus every hand tool in the book.
Ulmia Chisel sets X 3
Permobile Custom RideForward Powerchair
Complete set of registered # NASA X-15 Custom Tools W/Ownership certificate
SS Model 5 500 Completely Restored
SS Bandsaw Completely Restored
SS Jointer Completly Restored
SS Biscuit Cutter
Rikon Low Speed Grinder W/Wolverine jig
Kreg Tool TrackHorse X 2 + Kreg Tool Project Center with 35 Kreg Tool Clamps
11 Systematic Blades of every configuration
Bosch/Mikita handheld power tools plus every hand tool in the book.
Ulmia Chisel sets X 3
Permobile Custom RideForward Powerchair
Complete set of registered # NASA X-15 Custom Tools W/Ownership certificate